Bedienungsanleitung Kaysun KP-35 HP10 (Seite 15 von 20) (Englisch)

725796

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Operation

Operation Instructions

COOL operation

- Press the “MODE” button until the “COOL” indicator

light comes on.

- Press the ADJUST buttons “+” or “-” to select your

desired room temperature. The temperature can be

set within a range of 17ºC~30ºC/62ºF~86ºF (or 88ºF).

- Press the “FAN SPEED” button to choose the fan

speed.

HEAT operation (cooling only models without)

- Press the “MODE” button until the “HEAT” indicator

light comes on.

- Press the ADJUST buttons “+” or “-” to select your

desired room temperature. The temperature can be

set within a range of 17ºC~30ºC/62ºF~86ºF (or 88ºF).

- Press the “FAN SPEED” button to choose the fan

speed. For some models, the fan speed can not be

adjusted under HEAT mode.

DRY operation

- Press the “MODE” button until the “DRY” indicator

light comes on.

- Under this mode, you cannot selectc a fan speed or

adjust the temperature. The fan motor operates at

LOW speed.

- Keep the windows and doors closed for the best de-

humidifying effect.

- Do not put the duct to window.

AUTO operation

- When you set the air conditioner in AUTO mode, it

will automatically select cooling, heating (cooling only

models without), or fan only operation depending on

what temperature you have selected and the room

temperature.

- The air conditioner will control room temperature au-

tomatically round the temperature point set by you.

- Under AUTO mode, both the AUTO mode and the

actual operation mode indicator lights illuminate for

some models.

NOTE: Under AUTO mode, both the AUTO mode and

the actual operation mode indicator lights illuminate for

some models.

FAN operation

- Press the “MODE” button until the “FAN” indicator li-

ght comes on.

- Press the “FAN SPEED” button to choose the fan

speed. The temperature can not be adjusted.

- Do not put the duct to window.

TIMER operation

- When the unit is on, press the Timer button will initia-

te the Auto-off stop program, the TIMER OFF indica-

tor light illuminated. Press the UP or DOWN button

to select the desired time. Press the TIMER button

again within 5 seconds, the Auto-on start program is

initiated. And the TIMER ON indicator light illumina-

ted. Press the up or down button to select the desired

Auto-on start time.

- When the unit is off, press the Timer button to initiate

the Auto-on start program, press it again within 5 se-

conds will initiate the Auto-off stop program.

- Press or hold the UP or DOWN button to change the

Auto time by 0.5 hour increments, up to 10 hours,

then at 1 hour increments up to 24 hours. The control

will count down the time remaining until start.

- The system will automatically revert back to display

the previous temperature setting if there is no opera-

tion in a 5 seconds period.

- Turning the unit ON or OFF at any time or adjusting

the timer setting to 0.0 will cancel the Auto Start/Stop

timer program.

SLEEP(EXO) operation

- Press this button, the selected temperature will in-

crease (cooling) or decrease (heating) by 1ºC/2ºF (or

1ºF) 30 minutes. The temperature will then increase

(cooling) or decrease (heating) by another 1ºC/2ºF

(or 1ºF) after an additional 30 minutes. This new tem-

perature will be maintained for 7 hours before it retur-

ns to the originally selected temperature. This ends

the Sleep/Eco mode the unit will continue to operate

as originally programmed.

NOTE: This feature is unavailable under FAN or DRY

mode.

Other features

FOLLOW ME/TEMP SENSING feature (optional)

NOTE: This feature can be activated from the remote

control ONLY. The remote control serves as a remote

thermostat allowing for the precise temperature control

at its location. To activate the Follow Me/Temp Sensing

feature, point the remote control towards the unit and

press the Follow Me/Temp Sensing button again. If the

unit does not receive the Follow Me/Temp Sensing sig-

nal during any 7 minutes interval, the unit will exit the

Follow Me/Temp Sensing mode.

NOTE: This feature is unavailable under FAN or DRY

mode.

AUTO-RESTART

If the unit breaks off unexpectedly due to the power cut,

it will restart with the previous function setting automa-

tically when the power resumes.

AIR FLOW DIRECTION ADJUSTMENT

The louver can be adjusted automatically, Adjust the air

ﬂow direction automatically:

- When the Power is ON, the louver opens fully.

- Press the SWING button on the panel or remote con-

troller to initiate the Auto swing feature. The louver will

swing up and down automatically.

- Please do no adjust the louver manually.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KP-35 HP10 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KP-35 HP10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info