771555
14
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
HEAT MODE
No.
SCROLL
TIME TEMP.
00:0
04
5°C
200:0045°C
300:0045°C
1
1/2
MULTIPLE
SET POINT
WEATHER
TEMP. SET
PRESET
TEMP.
HEAT MODE
No.
SCROLL
TIME TEMP.
00:0
04
5°C
500:0045°C
600:0045°C
4
2/2
MULTIPLE
SET POINT
WEATHER
TEMP. SET
PRESET
TEMP.
OK SELECT
HEAT MODE
No.
SCROLL
TIME TEMP.
00:0
5°C
200:0045°C
300:0045°C
1
1/2
MULTIPLE
SET POINT
WEATHER
TEMP. SET
PRESET
TEMP.
OK CANCEL
HEAT MODE
No.
SCROLL
TIME TEMP.
00:0
5°C
200:0045°C
300:0045°C
1
1/2
MULTIPLE
SET POINT
WEATHER
TEMP. SET
PRESET
TEMP.
04:27 sun
MAIN
SET
ON
45 °C
27-05-2019
04:27
No.
1
2
3
4
5
6
TIME
8:00
12:00
15:00
18:00
20:00
23:00
TEMP.
70°C
60°C
70°C
60°C
70°C
60°C
60°C
70°C
8:00 12:00 15:00 18:00 20:00 23:00
12
6 FUNCTIONS
6.1 HEAT MODE
In heat mode, PRESET TEMP.WEATHER TEMP.
SETMULTIPLE SET POINT are available.
6.1.1 PRESET TEMP.
PRESET TEMP. is used to set different desired water
outlet temperatures at different times.
PRESET TEMP. =PRESET TEMPERATURE
The PRESET TEMP. function will be automatically
disabled in the following conditions:
1) Timer is set.
2) Weekly schedule is set.
Take the following steps to enable PRESET TEMP.:
MENU > PRESET TEMPERATURE > PRESET TEMP.
Press OK.
The following interface is displayed:
use ''▲'', ''▼'', ''►'', ''◄'' to scroll and use ''▲'', ''▼'' to
adjust the time and the temperature. When the cursor
is on ''■'', as in the following page:
Press ''OK'', and the ''■'' becomes '' ''. The timer 1 is
selected. Press ''OK'' again, and '' '' becomes ''■''. The
timer 1 is unselected.
use ''▲'', ''▼'', ''►'', ''◄'' to scroll and use ''▲'', ''▼'' to
adjust the time and the temperature. Six temperatures
can be set. For example:
The time is 8:00 and temperature is 60. If PRESET
TEMP. is set as follows, the hydro module will operate
according to the following curve.
Notes:
1. When the multiple set point function is enabled, the
PRESET TEMP. function is valid to space0 only.
2. If the hydro module is powered off, the preset
temperature at the current time is invalid. The hydro
module will be started at the time point where the next
preset temperature is set.
3. When the timer function is valid, if you move the
cursor to PRESET TEMP. and press the OK key, the
following prompt is displayed:
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kaysun KWF-140 HT ACS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kaysun KWF-140 HT ACS

Kaysun KWF-140 HT ACS Bedienungsanleitung - Deutsch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info