771555
31
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
29
6.9 On-site FOR SERVICEMAN
Settings
6.9.1 About FOR SErVICEMAN
FOR SERVICEMAN is used for installers and service
engineers.
Setting the function of equipment.
Setting the parameters.
6.9.2 How to Go to FOR SERVICEMAN
Go to ''MENU'' > ''FOR SERVICEMAN''. Press ''OK''.
OK ENTER SCROLL
FOR SERVICEMAN
ADJUST
Please input the password:
2 3 4
The FOR SERVICEMAN is used for installers or
service engineers. It is NOT intended for home
owners to alter setting with this menu.
It is for this reason that password protection is
required to prevent unauthorised access to the
service settings.
The password is 234.
6.9.3 How to Exit FOR SERVICEMAN
If you have set all the parameters. Press ''BACK'', and
the following page will appear:
FOR SERVICEMAN
OK ENTER ADJUST
NO YES
Apply settings and exit ?
Select ''YES'' and press ''OK'' to exit the FOR
SERVICEMAN. After exiting the FOR SERVICEMAN,
the unit will be turned off.
Select speed. 0 = Not limited; 1 = Speed 1; 2 = Speed
2; 3 = Speed 3.
Speed 0: It indicates that the maximum current for
hydro module operation is 16 A.
Speed 1: It indicates that the maximum current for
hydro module operation is 15 A.
Speed 2: It indicates that the maximum current for
hydro module operation is 14 A.
Speed 3: It indicates that the maximum current for
hydro module operation is 13 A.
6.9.4.2 Heat Recovery Function
This function will automatically enable the heat recovery
function of the hydro module to produce hot water when
the start-up capacity of the chiller’s IDU is great. Choose
MENU > FOR SERVICEMAN > HEAT RECOVERY
MODE SETTING. Press OK. The following interface is
displayed.
9. HEAT RECOVERY MODE SETTING
HEAT RECOVERY
Ttank_recovery_max
YES NO
70°C
SCROLL
HEAT RECOVERY=YES indicates that the heat
recovery function is enabled. HEAT RECOVERY=NON
indicates that heat recovery function is disabled.
Ttank_recovery_max indicates that the desired tank
temperature of the heat recovery function is set.
6.9.4 Settings of Special Functions
6.9.4.1 Max. Power Limitation Function
This function can limit the power consumption of the
hydro module. Choose MENU > FOR SERVICEMAN >
POWER INPUT LIMITATION. Press OK. The following
interface is displayed.
10. POWER INPUT LIMITATION
LIMITATION LEVEL
SCROLL
0
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kaysun KWF-140 HT ACS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kaysun KWF-140 HT ACS

Kaysun KWF-140 HT ACS Bedienungsanleitung - Deutsch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info