Bedienungsanleitung Keiser 3020XP Functional Trainer (Seite 14 von 20) (Englisch)

738046

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

OPERATION MANUAL

FUNCTIONAL TRAINER

MAINTENANCE

PREVENTATIVE MAINTENANCE SCHEDULE

Daily

• Wipe down the external body/parts using a moist cloth and a mild detergent (neutral,

non-caustic). Wipe dry the equipment.

• Check that parts most susceptible to wear are not damaged or broken:

– Pulleys, Cable, Cable Link, Handle, Thumb Buttons, and Adjustment Plunger.

• Check to ensure that the Functional Trainer is in safe and proper working order:

– The Functional Trainer is securely fastened to the base (oor mount or free-

standing). There should be no movement of the unit in any direction during use.

– Press the “+” and then “-” Thumb Buttons a few times to ensure air cycles

through and that the Power Display powers on.

– Cable travels freely and smoothly without binding.

Monthly

• Inspect Air Line for kinks, tears, or breaks.

• Clean the external body/parts thoroughly, targeting areas that come in contact with

sweat, using a moist cloth and a mild detergent (neutral, non-caustic). Wipe dry the

equipment.

Quarterly

• Check mount hardware (wedge anchors) and externally visible screws are fastened with

no looseness. There should be no movement of the unit in any direction during use.

Annually and

other Required

Maintenance

• For complete instructions, see page 16 “Annual Maintenance.”

• Battery Replacement. The low battery signal (“Lo-bA”) will appear on the Power Display

when it is time to replace the batteries. Refer to page 15 “Battery Replacement” for

complete instructions.

For establishments with multiple Functional Trainer machines, replacement of all

Power Display batteries at the same time is recommended.

NOTE: Your Keiser Air Compressor (not included with your Functional Trainer) requires

basic annual maintenance. For complete Keiser Air Compressor maintenance instructions,

download the user manual at keiser.com/support (search: Air Compressor manuals).

Weekly

• Hand wash the strap material of accessories using mild detergent (neutral, non-caustic)

and water. Air dry only.

Contact Keiser Customer Support for replacement parts order, or for any matters regarding the safe operation of your

Functional Trainer (see back cover for contact information).

IMPORTANT: Do not use household or industrial cleaners as they contain caustic chemicals that can destroy the paint

nish and cause corrosion. Use only mild detergent (neutral, non-caustic) to clean. A quat disinfectant cleaner (quaternary

ammonium chloride) with an anti-microbial agent is acceptable.

CAUTION: THE HIGHEST LEVEL OF EQUIPMENT SAFETY CAN ONLY BE ENSURED IF EQUIPMENT IS

REGULARLY INSPECTED FOR DAMAGE AND WEAR. Always check that the Functional Trainer is securely

fastened to the Free-standing or Floor Mounted Base before use (no tilt, lean, or any other movement of the

unit should be detected during use). Immediately replace damaged, worn, or broken parts. Do not use the

Functional Trainer until all repairs have been completed and tested by a Keiser-certied technician.

CAUTION: SERVICE AND REPAIR SHALL ONLY BE PERFORMED BY KEISER-CERTIFIED TECHNICIANS.

Failure to follow these instructions can result in serious injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keiser 3020XP Functional Trainer Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info