Bedienungsanleitung Kelvinator KSE53HRC (Seite 8 von 16) (Englisch)

478080

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Kelvinator Air Conditioning Features of the remote contol 5

In Heat mode

 (1)Whentheinitialtemperatureissetat16°C,theair

conditioner will continue to run at this setting.

 (2)Whentheinitialtemperatureissetatbetween

17°C-20°C, after Sleep function is selected, the set

temperature will decrease 1°C at the end of the ﬁrst

hour and continue to run at this setting.

 (3)Whentheinitialtemperatureissetbetween

21°C-27°C, after this Sleep function is selected,

the temperature will decrease 1°C in every hour,

after 2 hours the air conditioner will continue to

run at this setting.

(4)Whentheinitialtemperatureissetbetween

28°C-30°C, after this Sleep function is selected

the temperature will decrease 1°C in every hour,

after 3 hours the air conditioner will continue to run

at this setting.

Sleep Mode 3

In this mode the sleep temperature curve is manually

(1) After selecting Sleep mode 3, press and hold the

Turbo button until the remote control enters into

user deﬁned sleep setting status. The remote control

will display "1 hour", temperature display will show

the corresponding temperature of last setting sleep

curve and blink (The ﬁrst use will display the original

factory setting).

(2) Adjust "

" and " " buttons will change the setting

temperature for the ﬁrst hour of sleep, after

setting the temperature, press the Turbo button

for conﬁrmation.

(3) The hour of sleep mode will be automatically

increased on the remote control, to the 2nd, 3rd hour

of sleep mode and so on with each press of the

Turbo but ton.

(4) Repeat the above step (2 )-(3) operation, until 8 hours

of sleep temperature setting is ﬁnished. The sleep

curve program is ﬁnished The remote control will

resume the original timer display. The temperature

display will return to the original setting.

The sleep program can be checked by selecting sleep

mode 3, pressing and holding the Turbo button and

then repeat pressing the turbo button to review the

sleep program temperatures without pressing the "

or "

" buttons. In this mode, if the no button were to

be pressed for 10 seconds, the display will revert to

normal operation.

10 I FEEL Button

Press this button once, to turn on the I FEEL

function, then the symbol of "I FEEL" will be displayed.

The air conditioner will then operate to reach the set

temperature at the location of the remote control.

After this function has started, the remote control will

send temperature to the main unit every 10 minutes.

Once the button has been pressed again, the function

will be cancelled.

11 QUIET Button

During operation press the Quiet button in order to use

HEAT mode.

12 SLEEP Button

Pressing this button to select sleep mode (

sleep mode (

), Sleep mode ( ) and cancel the

Sleep mode. Circulate between these modes after

the air conditioner is switched on.

Sleep mode 1

increase 1°C after an hour, after 2 hours the set

temperature will increase another 1°C, then continue to

run at this setting. In Heat mode: the set temperature

will decrease 1°C, after 2 hours the set temperature

will decrease another 1°C, then continue to run at

this setting.

Sleep mode 2

In this mode, the air conditioner will run according to a

preset sleep temperature curve.

In Cool mode

 (1)Whensettingtheinitialtemperaturebetween

16-23°C, after turning on the Sleep function, the

temperature will increase 1°C every hour, after 3°C

the temperature will be maintained, after 7 hours, the

temperature will be decreased a further 1°C, after that

the unit will keep running at this temperature;

 (2)Whensettingtheinitialtemperaturebetween

24°C-27°C, after turning on the Sleep function, the

temperature will increase 1°C in every hour, after 2°C

the temperature will be maintained, after 7 hours, the

temperature will be decreased a further 1°C, after

that the unit will keep running at this temperature;

 (3)Whensettingtheinitialtemperaturebetween

28°C-29°C, after turning on the Sleep function, the

temperature will increase 1°C in the ﬁrst hour, after

7 hours, the temperature will be decreased a further

1°C, after that the unit will keep running at this

temperature;

 (4)Whensettingtheinitialtemperatureto30°C,after7

hours the temperature will be decreased 1°C, after

that the unit will keep running at this temperature.

set ( Dehumidify).

In Cool and Dehumidify modes, the set temperature will

the Quietest fan mode in AUTO, COOL, DEHUMIDIFY,

FAN or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kelvinator KSE53HRC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info