Bedienungsanleitung Kemper 1066 (Seite 4 von 24) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Norwegisch, Finnisch)

778306

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1066

DT istr (1066)_01/2018_Rev.1_07/18 4/24

Thank you for purchasing one of our products. We recommend you carefully read this instruction manual: it

contains important information regarding safety regulations for use and maintenance of the appliance. It is also

recommended to keep this document carefully to consult in case of necessity.

DESCRIPTION

Hot air gun ART. 1066: (Thread connection EN417 7/16”)

• Piezo Ignition

• Adjustable flame through pressure regulator

• Max exit air temperature: 450°

• Ergonomic Design

• Security system against accidental lighting

• Antiflare system

1. Gas cartridge connection

2. Control/Ignition knob

3. Protector/vertical stand

4. Fixing ring for heat sink cage

5. Heat sink cage

Applications

• Heat shrink tubing

• Heat shrinkable materials

• Shrink wrap

• Bending plastics and composite materials

• Applying decorative films

• Heat removal of various substance

• Automotive dent repair

• Thraw frozen pipes

• Spot ice melding

• Leather and vinyl repair

• Starting BBQ charcoal

GENERAL WARNING / IMPORTANT

1. Read these instructions carefully in order to familiarize yourself with the appliance before connecting it to

its gas container. Keep these instructions for future reference.

2. Carefully read the information stamped on the cartridge before you connect the unit to it.

3. Do not expose the device connected to the cartridge to temperatures above 50 °

4. This device works only with direct pressure butane/propane threaded gas cartridge KEMPER series 581, series

580 and series 575. It can be dangerous to try to use other gas cartridges.

5. Make sure the valve is closed before handling the equipment.

6. Always check that the seal, between the device and the cartridge, is in place and in good condition before

connecting it to the gas container.

7. Never use appliances with worn or damaged seals.

8. This device should only be used in sufficiently ventilated area in accordance with national requirement. The

volume of air needed for proper combustion and prevent formation of dangerous unburned gas mixtures is 2

m3 / h per kW.

9. Warning: accessible parts can become very hot. Keep out of reach of children and away from other appliances

and sources of heat.

10. The appliance should be operated away from flammable materials and at a distance of 70 cm from furniture,

walls and ceiling.

11. Although the internal nozzle flame cannot exceed the length of the nozzle, be extra careful when using the

heat outdoors on sunny or windy days. Wind may carry the heat back towards you or other areas not intended

to be heated.

12. If there is a leak on your appliance (smell of gas) take it outside immediately into a well ventilated flam free

location, where the leak may be detected and stopped. If you need to check for leaks on your appliance, do

it outside. Do not try to detect leaks using flames, use our item Revelgas 1726 or soapy water.

Apply solution

of soap and water or gas detector in the interspaces of the unit. If bubbles appear, it means that there is a

leak and it must be repaired before use. If you detect a leak and you cannot repair it, don’t try to fix it

another way, but contact the customer service.

13. Do not use an appliance which is leaking, damaged or which does not operate properly.

14. Do not modify the appliance. It is dangerous to bring modification on device, remove or disassemble its

components or use components which are not approved by the manufacturer, all of this causes the

cancellation of warranty and manufacturer's responsibility.

15. Always make certain the heat gun is placed on a level surface when connected to the fuel cartridge to reduce

the risk of accidentally tip over.

16. During use the cartridge is subject to emptying: be careful not to leave unattended the lit appliance in upright

position, as its stability can not be guaranteed.

17. Be sure the heat gun is not pointed in a direction which could cause nearby object to ignite when the gun is

set down.

18. Never leave the heat gun unattended when lit.

19. Do not use the appliance if not complete all of its components.

20. If necessary, wear safety glasses and protective gloves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemper 1066 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info