686374
10
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
10
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
Proceed as follows:
1. Mount the intermediate ange (6) on the robot
(5), using eight (M4) cylinder-head screws. Max.
tightening torque M = 3.5 Nm
2. Fasten the insulating ange (4) to the intermediate
ange (6), using four cylinder screws (3). Max.
tightening torque M = 6 Nm
Make sure that the cylindrical pin (7) is in the correct
position. It species the reference position in relation to the
robot.
3. Fasten the complete welding torch coupling (2) to
the insulating ange (4), using six cylinder screws
(8). Max. tightening torque M = 3.5 Nm.
4. Mount the insulating sleeve (9) and the lock ring (1)
on the complete welding torch coupling (2), and
secure with the retaining ring (10).
11. INSTALLING ROBOT GUN MOUNT T3
Risk of injury due to unexpected start-up
For the entire duration of maintenance, servicing, unmounting, and repair work,
the following instructions must be adhered to:
Switch o the power supply.
Cut o the compressed air supply.
Pull the power plug.
Read the safety instructions in this manual and the separate safety instructions.
The system may only be installed by authorized personnel.
11.1 Fastening Robot Gun Mount T3 to the robot
This section describes how to fasten the robot mount to the robot.
The parts of the system are depicted in the gure below.
Figure 3: Fastening Robot Gun Mount T3 to the robot
3
7 6
1
4
2
5
9
8
10
1. Lock ring
2. Complete welding torch coupling
3. 4 cylinder screws, M5×50
4. Insulating ange
5. Robot
6. Intermediate ange
7. Cylindrical pin
8. 6 cylinder screws, M5×16
9. Insulating sleeve
10. Retaining ring
For fastening Robot Gun Mount T3 to the robot, a robot ange (2) is required. It must
correspond to the hole pattern of the robot mount (1) and of the robot.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kemppi A7 Robot Gun Mount T3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info