Bedienungsanleitung Kemppi A7 TIG Orbital System 300 (Seite 26 von 61) (Englisch)

686409

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

A7 TIG Orbital System 300© Kemppi Oy 2016 1615

OPERATING MANUAL

Print welds

On the Print Weld Files screen you can print to the built‐in

paper tape printer and/or an internal memory location.

Printing to the printer provides an immediate hard copy

of the weld program. You can print weld programs to

memory one or more times over a period of time and then

download them to a memory stick for storage or transfer

them to other electronic media. The contents of memory

will be deleted.

1. On the Maintenance Menu, select Print Welds.

2. Select Weld To Print.

3. Using the control knob, enter the weld number to

print.

4. Select Print or Store File.

5. Use the control knob to select: Memory, Printer, or

Both.

6. Select Short Form (parameters only) or Long Form

(parameters, as well as all procedure information

and notes).

7. To save the settings that have been changed on the

Maintenance / Print Weld Files screen, press Save.

Memory Internal memory

Print Transfer les for printing to integrated printer

or transfer to memory stick for printing using

a PC.

Automatic

Printout

If set to Yes, the printout automatically occurs

following each weld.

Transferring print les to memory stick

You can use a memory stick to transfer or move les to

a standard PC equipped with a printer for later printout.

1. Select the weld number to transfer and use the

control knob to select Print to Memory, Print, or

Both.

2. Press Print. A screen will state that the weld has

been successfully saved to memory.

3. Save one or more welds to print later. (The memory

stick does not have to be installed at this time.)

To transfer a weld program from internal memory to a

memory stick:

1. Place the stick in the USB port in the front panel.

2. The stick will require approximately 1 minute to

initialize, at which time the LCD on the side of the

key will slowly pulse.

3. When the stick is ready, the LCD blinks rapidly 5

times.

4. If no stick is installed or it has not yet nished

initializing, an error message displays.

5. Press Dnload to download all stored print les to

the stick.

Dnload will delete these programs from memory.

You can open the print les saved on a memory stick in any

text editor, such as Microsoft® Word, Microsoft® Notepad,

or Microsoft® Excel.

In case you see an error message, return to Main

Menu and re-enter the print screen. “Error” will change to

“Dnload”. If a memory stick is installed and initialized prior

to entering the print screen, this step is not required.

Printout (300 and 150 series weld heads only)

At weld completion, the 300-series provides an immediate

unambiguous report that indicates whether a weld was

made. It is not a complex data‐logging program, and

it does not require interpretation of chart/graphical

printouts of the entire weld.

The following information is printed out:

• Weld ID number

• Date

• Time

• Operator’s name

• Welding parameters from each layer

Printable information can also be stored on a memory

stick via the USB connector on the remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi A7 TIG Orbital System 300 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info