Bedienungsanleitung Kemppi FastMig WFX 300 P-T (Seite 5 von 36) (Englisch)

686307

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

1. INTRODUCTION

1.1 General

Congratulations on choosing the Kemppi WFX welding equipment. Used correctly, Kemppi

products can signicantly increase the productivity of your welding, and provide years of

economical service.

This operating manual contains important information on the use, maintenance and safety of

your Kemppi product. The technical specications of the equipment can be found at the end

of the manual.

Please read the operating manual and the safety instructions booklet carefully before using

the equipment for the rst time. For your own safety and that of your working environment,

pay particular attention to the safety instructions in the manual.

For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi web site at www.kemppi.com.

The specications presented in this manual are subject to change without prior notice.

Important notes

Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and follow

their instructions.

Disclaimer

While every eort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specication of the product described at any time without

prior notice. Do not copy, record, reproduce or transmit the contents of this guide without

prior permission from Kemppi.

1.2 About WFX wire feeders

Kemppi WFX 200 and 300 are basic wire feeders for regular pulse welding. They are equipped

with the WiseFusion™ welding process and are best suitable for basic MIG/MAG welding

purposes with robust thick metal plates.

Kemppi WFX 200 P Fe, WFX 300 P Fe, WFX 200 P Ss and WFX 300 P Ss are wire feeders for

more demanding professional use for example in pipe welding. They are equipped with the

WiseRoot+™ welding process developed especially for ecient root welding on pipes and

plates. Based on the model chosen, the wire feeder comes with either steel (Fe) or stainless

steel (Ss) pack preinstalled.

Kemppi WFX 200 AMC and 300 AMC are wire feeders designed for demanding professional

use featuring most of the Kemppi software options available. They are equipped for example

with the WiseThin+™ welding process, developed especially for ecient welding for thin

sheets and position welding, also with CO

shielding gas.

WFX 200 AMC and 300 AMC wire feeders can also be controlled in conjunction with FastMig

X power sources through Kemppi's ARC Mobile Control, which is a tablet computer based

wireless control interface. The required ARC Mobile Control adapter is included with the AMC

wire feeder models and provided as an option for the rest of the WFX wire feeders.

If a customer needs a specic set of software for their production, there is a tailored wire

feeder option available. With a special conguration tool customers can select the desired

software products to be factory-installed on the wire feeder, or they can just order an empty

wire feeder with no software pre-installed and only MIG welding enabled.

WFX wire feeders can be used with FastMig X power sources.

Operation of the wire feeder is controlled and adjusted by microprocessor. By adding an

optional synchronization unit MXF Sync 65, the SuperSnake sub-feeder device may be

connected to the WFX 300 series wire feeders (not available for WFX 200 series).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi FastMig WFX 300 P-T Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kemppi FastMig WFX 300 P-T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info