Bedienungsanleitung Kemppi Minarc Evo 180 (Seite 5 von 18) (Englisch)

686272

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

1. PREFACE

1.1 General

Congratulations on choosing Minarc Evo welding equipment. Used correctly, Kemppi

products can signicantly increase the productivity of your welding, and provide years of

economical service.

This operating manual contains important information on the use, maintenance and safety of

your Kemppi product. The technical specications of the equipment can be found at the end

of the manual.

Please read the manual carefully before using the equipment for the rst time. For your

own safety and that of your working environment, pay particular attention to the safety

instructions in the manual.

Read also the separate Kemppi Safety Instructions booklet delivered in the product package.

Pay particular attention to the risks associated with re and explosion.

For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi web site at www.kemppi.com.

For Kemppi’s standard safety instructions and warranty terms and conditions, please visit our

web site at www.kemppi.com.

The specications presented in this manual are subject to change without prior notice.

NOTE! Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with this symbol. Read these sections carefully and follow their

instructions.

Disclaimer

While every eort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specication of the product described at any time without

prior notice. Do not copy, record, reproduce or transmit the contents of this guide without

prior permission from Kemppi.

1.2 Product introduction

Minarc Evo 180 is an easy-to-use welding machine for MMA (stick welding). It is suitable

for professional use in metal industry, work sites and repair welding. Before use or doing

any maintenance work on the machine, read the operating manual and keep it for further

reference.

A separate voltage reduction device (VRD) model is also available. Minarc Evo 180VRD

includes VRD for maintaining the open-circuit voltage (OCD) at 30 volts. With AU models

(Australia, New Zealand) VRD for maintaining the open-circuit voltage at 12 volts is always

included.

Minarc Evo 180 tolerates uctuations in input voltage, and it is suitable for on-site work using

power generators and long power cables. The power source utilises PFC technology to ensure

optimum usage on a single phase power supplies. IGBT inverter design delivers reliable arc

ignition and welding performance with all electrode types.

Welding and earth return cables are supplied in the delivery package, including electrode

holder, earth clamps and connections.

Minarc Evo can also be used for basic TIG welding, where the TIG arc is started by the lift arc

ignition technique. Order numbers for the additional equipment required for TIG welding and

for the remote current control devices can be found in section 5 "Ordering codes".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi Minarc Evo 180 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kemppi Minarc Evo 180

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info