Bedienungsanleitung Kensington SlimBlade Media Notebook Set (Seite 3 von 5) (Englisch)

588191

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Battery indicator

1. Keyboard – When the Mouse battery is ﬁne – it ﬂashes green and then goes off at power

up. When Mouse battery is low, it will ﬂash red. If LED does not light up at power up – the

batteries must be replaced.

2. Number Keypad – When the Mouse battery is ﬁne – it ﬂashes green and then goes off at

power up. When Mouse battery is low, it will ﬂash red. If LED does not light up at power up

– the batteries must be replaced.

3. Mouse – When there is connection and good batteries in the mouse, the green LED will

stay solid for 5 seconds at start up. If there is connection but the battery is weak, the LED

will ﬂash red for 5 seconds. If the battery gets weak in the middle of use, the LED will also

ﬂash red.

LED will also light up when the Receiver is removed from the mouse to start up.

Note: Please use fresh non-rechargeable alkaline batteries. We recommend that you use same

brand of batteries.

Install the Driver Software

For PC Users - this driver will allow you to have 4 way tilt scroll control and enable hot keys

functions on your keyboard

1 2 3

Keyboard Hot Keys

Eject – Ejects CD Tray (Mac® and PC) - (Works in PC only if you install driver

provided)

Media Player – Launches the default Media Player (PC only)

Back Up – Launches the Back Up Application (PC only)

Gadgets – (For Windows Vista™ operating system) and Dashboard (for Mac)

(Works in PC only if you install driver provided)

Search & Organize – (For Windows Vista) and Spotlight (for Mac) (Works in PC only

if you install driver provided)

Mouse

This is a 2 Button Mouse with a jogball for 360 degrees scroll (Driver is required for this

functionality). Rolling this jogball scrolls the document on screen. The Mouse shuts down

when the dongle is stored inside it.

Common Troubleshooting Steps

1. Un-plug and re-plug the receiver.

2. Install fresh batteries in the mouse

3. Test the device on another port or computer.

4. Some surfaces may “trick” the sensor, such as reﬂective surfaces like glass or mirrors.

As a result this product will not work well on glass or mirror surfaces. The sensor

should perform well on all other surfaces.

To reconnect your modules to the Receiver dongle:

The modules are connected to the dongle right out of the box.

You DO NOT need to connect the modules to the dongle unless you see the modules are

not responding to key presses (for >30 secs.)

In case you need to re-connect the modules to the dongle, do the following:

1. Press and release the round button on the dongle.

2. Flip the module you want to re-connect to this dongle and use a paper clip or

something similar to poke into the tiny hole on the underside of the module.

3. You should get a tactile click when the switch inside the module is actuated.

4. The module should now be connected.

5. Caution: Do not use this re-connect procedure until you have gone through the

troubleshooting steps above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kensington SlimBlade Media Notebook Set Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info