Bedienungsanleitung Kenwood BD-7000 (Seite 25 von 55) (Englisch)

465312

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Video/Picture/Music Playback

Loading a Disc/Ejecting a Disc

1 Press a to turn on the power.

2 Load a disc into the disc slot.

• Insert the disc with the label face up.

• In case of disc recorded on both sides, face down the

side to play back.

To eject a disc

While in stop mode, press m.

BD/DVD Video Playback

BD-RBD VIDEO BD-RE

DVD-RW

DVD VIDEO DVD-R

This section explains playback of commercially

available BD Video and DVD Video discs (like movies)

and recorded DVD-RW/R discs.

• This player supports DVD upscaling during DVD playback.

• For a description of other playback functions, refer to

“Playback Functions” on pages 31–33.

1 Load a disc.

• Playback may begin automatically, depending on the disc.

• Playback begins from the first title.

• The menu may be displayed first, depending on the

disc. Perform playback operation by following the

directions on the screen.

• When loading a disc containing 3D content (3D BD

video) with “Yes” selected in the “3D Notice” setting

(Page 39), playback will be stopped and the 3D notice

will be displayed on the TV screen. In such cases,

press ENTER for confirmation, and then playback will

start.

2 Press d (Play) if playback does not begin

automatically or playback is stopped.

NOTE

• The disc load time may vary depending on the disc.

Regarding playback of BD video discs

• Some of the newly released BD video discs cannot be

played back unless you update the player software to the

latest version. Therefore, it may be required to update the

software of the player.

Refer to page 43 for more information regarding software

updates for the player.

To stop playback

Press H.

Resume playback function

• If you press d (Play) next, playback will resume from

the point where the Player was previously stopped. To

playback from the beginning, cancel resume mode by

pressing H, then press d (Play). (This may not work

depending on the type of disc.)

NOTE

• Resume playback may not function depending on the disc.

Displaying the disc information

Press DISPLAY during playback.

• Each time you press DISPLAY, the display switches

as follows.

1 Type of disc

2 Title number being played / Total number of Titles

3 Chapter number being played / Total number of

Chapters

4 Elapsed playback time / Total playback time for the

Title

NOTE

• Disc Information Screen A disappears after about 1 minute

elapses without performing any operations.

• For some commercially-released BD VIDEO discs, the total

playback time display for the Chapter/Title may not appear.

BD-VIDEO

00 :00 : 12

1/1

10/1 1

03/:12:28

00 :00 : 12

03/:12:28

Disc Information Screen A

Disc Information Screen B

No Display

BD-7000_CD-ROM_en_r2.6.indd 24BD-7000_CD-ROM_en_r2.6.indd 24 10/10/07 9:0710/10/07 9:07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood BD-7000 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood BD-7000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info