Bedienungsanleitung Kenwood CK 408-1 (Seite 14 von 40) (Englisch)

649655

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ADVICE FOR SAFE USE OF THE

COOKTOP

• Before switching on make sure that

you have the correct knob for the

hotplate chosen. It is advisable to

put the pan on the hotplate before

switching

on and to take it away after

switching off.

• Use cookware with at and even bot-

toms (be careful when using cast iron

vessels). Uneven bottoms can scratch

the glass ceramic surfaces. Be careful

that the bottom is clean and dry.

• Pots with aluminium bottoms may lea-

ve silver streaks or spots on the bob.

• Do not leave wet or damp lids on the bob.

• The glass-ceramic surface and pans

must be clean. Carefully eliminate any

food remains (especially containing

sugar), dirt etc. with the ai d of a cle-

ansing agent.

• Make sure that the handles of cookwa-

re do not stick out over the edge of the

cooker, to avoid them being knocked

over by accident. This also makes it

more difcult for children to reach the

cooking vessels.

• Do not lean over the cooking zones

when they are switched on.

• Do not drop heavy or sharp objects on

the glass ceramic cooktop. If the sur-

face is broken or damaged unplug the

appliance and contact the after-sales

service.

• Do not put aluminium foil or plastic

objects on the cooking zones when

they are hot.

• Remember that the cooking zones re-

main hot for some time after they are

switched off (about 30 mm.).

• Follow the cleaning instructions carefully.

• If you note a crack in the cooktop,

switch the appliance off immedia-

tely and call the After-Sales Service.

Do not scratch the cooktop with

cutting or sharp objects.

Do not use the glass ceramic sur-

face as a work surface.

CLEANING

Before you begin cleaning make sure

that the appliance is switched off.

Remove any encrustation using a scraper

specic for glass ceramic surfaces.

Dust or food particles can be removed with

a damp cloth.

If you use a detergent, please make sure

that it is not abrasive or scouring.

Abrasive or scouring powders can dama-

ge the glass surface of the hob. All traces

of the cleaner have to be removed with a

damp cloth.

It is highly recommended to keep off the

hob any article which can melt: plastic,

aluminium foil, sugar, sugar syrup mixtures

etc.

If any of these products has melted on the

ceramic surface, you should remove it im-

mediately (when the surface is still hot) by

using a scraper to avoid any permanent

damage to the surface of the hob.

Avoid using any knife or sharp utensil since

these can damage the ceramic.

Do not use steel wool or an abrasive spon-

ge which could scratch the surface perma-

nently.

ATTENTION: MOST IMPORTANT!

If cleaning the glass ceramic hob using

a special tool (i.e. scraper) take extra

care to avoid damage to the seal at the

edges of the glass ceramic surface.

Fig. 3.9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood CK 408-1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info