Bedienungsanleitung Kenwood CR-ST100S (Seite 50 von 160) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

795404

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

10.3 Audio settings

For stations with poor reception, a slight quality improvement can be achieved by switching to mono

reception. To do this, press the <MENU> button and select "Audio setting". In the following menu

"FM weak reception" you can now answer the question "Listen inMono only" with "YES" or

"NO". The current setting is identied by "*".

10.4 Favourites (memory locations)

20 memory locations (favourites) are available for storing FM stations.

10.4.1 Storing FM stations on the direct selection buttons 1-5 on the radio:

On the radio, you can assign memory locations 1 - 5 using the number keys. To do this, select the

desired station and press a number key until "Preset stored" appears on the display. The memory

locations can be called up by pressing the button briey.

10.4.2 Storing of FM stations with the remote control:

Memory locations 1–10 can be assigned using the number buttons on the remote control. To do this,

select the desired station and press a number key on the remote control until "Preset stored" appe-

ars on the display. The memory locations can now be called up by pressing the remote control briey.

10.4.3 Storing of FM stations in memory locations 11 - 20:

Select the desired station and hold down the <FAVORITE> button on the radio or <FAV> on the

remote control. Now select a memory location from the list of station memories and conrm the

selection with the <NAVIGATE> button on the radio. The "Preset stored" appears on the display.

You can easily call up the memory locations by briey pressing the <FAVORITE> button on the radio

or <FAV> on the remote control. Use the <UP/DOWN> buttons or the <NAVIGATE> knob to select

a station and press <OK> to conrm.

Note: The memory locations cannot be deleted, but can only be overwritten with other stations.

11. Bluetooth Audio

The BLUETOOTH function enables the wireless transmission of music les (audio streaming) to the

radio. Smartphones, tablets or similar devices can be paired. To do this, select the source “Bluetooth

Audio” in the main menu.

11.1 Pairing Bluetooth devices for the ﬁrst time

Make sure that the terminal device to be paired is switched on and Bluetooth is activated. Select

the source "Bluetooth Audio" in the main menu. The "Bluetooth Discoverable" appears on the

display. Now open the Bluetooth settings on the terminal device to be paired and start searching for

available Bluetooth devices there. Select “KENWOOD CR-ST100S” and start the pairing process.

After successful pairing, "Connected" appears on the display. Now the music playback can be con-

trolled via the terminal. To do this, use the music App of your choice.

Basic operation of play/pause and skip forward/backward is possible using the corresponding buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood CR-ST100S Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info