795404
57
Zoom out
Zoom in
Vorherige Seite
1/160
Nächste Seite
25
16.4 "Standby format" menu
In this menu you can specify whether the clock should be displayed in standby mode in analogue or
digital form. Select with the <Left> or <Right> button, the conrmation is made with the <OK>but-
ton. The currently selected option is marked with”*”.
17. Language
In the "Language" menu you can set the menu language of the radio. If you have started up the
device with the Setup wizard, the device language has already been set there. To select a language,
please use the <UP> or <DOWN> buttons and conrm this by pressing the <OK> button. Alternati-
vely, the selection can also be made with the <NAVIGATE> knob.
The following languages are available:
Danish, German, English, Finnish, French, Italian, Dutch, Norwegian, Polish, Portuguese, Swedish,
Spanish, Turkish.
18. Factory reset
To reset the radio to the delivery state, please select "YES" in the menu "Factory reset".
Attention: All previous settings are deleted.
If you select "NO" the process is cancelled.
Note: In any case, reset the radio to the delivery state before you pass it on (e.g. sell, give away or
disposal).
19. Software update
In this menu you can check whether a software update is available for the radio.
If you select "Auto-check setting" the radio automatically checks the availability of new software
updates on a regular basis.
Select the menu item "Check now" to search for a new version. If newer software is found, please
select "YES" to install it or "NO" to cancel the update. If "YES" the radio restarts to carry out the
process.
Then the software is downloaded and you are asked with “Proceed” whether the update should be
carried out. Please choose "YES" if you consent or "NO" to cancel the update. The "Warning: do
not remove power" and the software version to be installed ash alternately. When the process is
complete, "Update completed" appears on the display and you can conrm the process with the
<OK> button.
57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood CR-ST100S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info