Bedienungsanleitung Kenwood DDX-4015BT (Seite 46 von 64) (Englisch)

565297

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

<Clock>

Adjust the clock time. (Page 5)

<Beep>

• ON (Initial): Activates the key-touch tone.

• OFF: Cancels.

• ON (Initial): Activates the remote sensor.

• OFF: Cancels.

You can memorize, recall, or clear the settings you

have made. (Page42)

< Bluetooth Setup>*

Configure settings for using a Bluetooth device, such

as connection and other general operations.

• Paired Device List: Press [Enter] to show the list

of registered devices. You can connect the device

or delete the registration. (Page32)

• PIN Code: Changes the PIN code of the unit.

(Page31)

• Device Name: Shows the device name to be

shown on the Bluetooth device— ”DDX****”.

• Device Address: Shows the device address of the

unit.

• Auto Connect:

– ON (Initial): The connection is automatically

established with the last connected Bluetooth

device when the unit is turned on.

– OFF: Cancels.

• Bluetooth HF/Audio: Select the speakers used for

Bluetooth (both phone and audio player).

– Front Only: From front speakers only.

– All (Initial): From all speakers.

• Auto Pairing:

– ON (initial): Establishes pairing automatically

with the connected iOS device (such as iPhone)

even if the Bluetooth function is deactivated on

the device. (Auto pairing may not work for some

devices depending on the iOS version.)

– OFF: Cancels.

• Initialize: Hold [Enter] to initialize all settings you

have made for using Bluetooth mobile phone and

Bluetooth audio player.

< DAB Setup>*

• L-Band Tuning:

– ON: Receives the L-Band width during Digital

Audio reception.

– OFF (initial): Cancels

• Antenna Power:

– ON (initial): Supplies the power to the DAB

aerial.

– OFF: Cancels

< AV Key Long Press>

Assigns the function of the AV button when held.

• V-OFF (Initial)

: Turns off the screen. (Page8)

• APPs: Displays the APPs screen.*

(Page19)

• R-CAM : Displays the picture from the rear view

camera. (Page28)

< DivX® VOD>

This unit has its own Registration Code. Once you

have played back a file with the Registration Code

recorded, this unit’s Registration Code is overwritten

for copyright protection.

• Press [Enter] to display the information.

• To return to the previous screen, press [OK].

<SI>

Activate or deactivate the security function.

(Page5)

<Serial Number>*

Displays the serial number.

Adjust the touch position of the buttons on the

screen. (Page43)

<Steering Remote Controller>*

Assign the functions to the keys on the remote

controller of the steering wheel. ( Contact your

Kenwood dealer for details.)

Displays the version information of the software.

You can update the software. (Page43)

Only for DDX6015BTR/DDX4015DAB/DDX4015BT/DDX4015BTR .

Only for DDX4015DAB.

Only displays the APPs screen when <AV Input> is set to

[iPod] (Page17).

Only for DDX4015DAB/DDX4015BT/DDX3015.

SETTINGSSETTINGS

DDX_Entry_E.indb 46DDX_Entry_E.indb 46 2014/09/11 11:142014/09/11 11:14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood DDX-4015BT Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood DDX-4015BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info