Bedienungsanleitung Kenwood DDX42BT (Seite 3 von 84) (Englisch)

511069

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

English 3

WARNINGS:

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in

a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while

driving, be sure to look around carefully.

• The driver must not watch the monitor

while driving.

Cautions on the monitor:

• The monitor built in this unit has been

produced with high precision, but it

may have some ineffective dots. This is

inevitable and is not considered defective.

• Do not expose the monitor to direct

sunlight.

• Do not operate the touch panel using a

ball-point pen or similar tool with the sharp

tip.

Press the buttons on the touch panel with

your finger directly (if you are wearing a

glove, take it off).

• When the temperature is very cold or very

hot...

– Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or

may move slowly. Pictures may not

be synchronized with the sound or

picture quality may decline in such

environments.

For safety...

• Do not raise the volume level too much,

as this will make driving dangerous by

blocking outside sounds, and may cause

hearing loss.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time

in hot or cold weather, wait until the

temperature in the car becomes normal

before operating the unit.

How to reset your unit

DDX6023BT/DDX6053BT

Reset button

DDX4023BT/DDX4053BT/DDX3023/DDX3053

Reset button

DDX42BT/DDX35

Reset button

If the unit fails to operate properly, press

the Reset button. The unit returns to factory

settings when the Reset button is pressed

(except the registered Bluetooth devices).

How to read this manual:

• Illustrations of DDX6023BT are mainly

used for explanation.

• This manual mainly explains operations

using the buttons on the monitor panel

and touch panel. For operations using the

remote controller (RC-DV340: supplied

only for DDX6023BT/DDX6053BT

), ☞ page

60.

• < > indicates the variable screens/

menus/operations/settings that appear

on the touch panel.

• [ ] indicates the buttons on the touch

panel.

• Indication language: English

indications are used for the purpose

of explanation. You can select the

indication language from the <Setup>

menu. (☞ page 46

)

Before use

The displays and panels shown in this

manual are examples used to provide

clear explanations of the operations. For

this reason, they may be different from the

actual displays or panels.

EN_GET0909-001A_EQ.indb 3EN_GET0909-001A_EQ.indb 3 12/11/13 15:2712/11/13 15:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood DDX42BT Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood DDX42BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info