Bedienungsanleitung Kenwood DNX4250BT (Seite 16 von 108) (Deutsch)

565275

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

- 16 -

Danger!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

sound pressure level ..................... 85,4 dB(A)

uncertainty .............................................3 dB

sound power level ....................... 96,4 dB(A)

uncertainty .............................................3 dB

Wear ear-muﬀ s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Vibration emission value a

= 19,054 m/s

K uncertainty = 1.5 m/s

The speciﬁ ed vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equip-

ment is used and may exceed the speciﬁ ed value

in exceptional circumstances.

The speciﬁ ed vibration value can be used to

compare the equipment with other electric power

tools.

The speciﬁ ed vibration value can be used for initi-

al assessment of a harmful eﬀ ect.

Keep the noise emissions and vibrations to a

minimum.

•

Only use appliances which are in perfect wor-

king order.

•

Service and clean the appliance regularly.

•

Adapt your working style to suit the appliance.

•

Do not overload the appliance.

•

Have the appliance serviced whenever ne-

cessary.

•

Switch the appliance off when it is not in use.

•

Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in

accordance with instructions, certain resi-

dual risks cannot be rules out. The following

hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

5. Before starting the equipment

Warning!

Always remove the battery pack before making

adjustments to the equipment.

5.1 Changing the saw blade (Fig. 2)

Warning!

Switch oﬀ the universal saw and pull out the bat-

tery pack each time before doing any work on the

machine and changing the blade.

Turn the ring (a) on the blade holder (4) as shown

in Fig. 2 until the blade (b) lets itself be slipped

into the slot of the blade holder (4). When you

now let go of the ring (a) again, the ring (a) should

return to its starting position. If this fails to hap-

pen, try turning the ring (a) by hand into its star-

ting position.

Pull on the blade to check whether it sits tightly in

the holder.

5.2 Adjusting the soleplate (Fig. 3)

Warning!

Pull out the battery pack.

To adjust the soleplate, press the soleplate lo-

cking button (5) on the right-hand side (looking

from the bottom) in order to unlock the soleplate

(3). Set the required distance and press the so-

leplate locking button (5) on the left-hand side

(looking from the bottom) in order to lock the sole-

plate again. Check that the soleplate is secure.

5.3 Charging the Li battery pack (Fig. 4-5)

1. Remove the battery pack (d) from the handle,

pressing the pushlock button (c) downwards

to do so.

2. Check that your mains voltage is the same as

that marked on the rating plate of the battery

charger. Insert the power plug of the charger

(e) into the mains socket outlet. The green

LED will then begin to ﬂ ash.

3. Push the battery pack onto the battery char-

ger.

Anl_TE_AP_18_Li_SPK7.indb 16Anl_TE_AP_18_Li_SPK7.indb 16 21.07.14 16:0621.07.14 16:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood DNX4250BT Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood DNX4250BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info