Bedienungsanleitung Kenwood DNX4330 (Seite 57 von 66) (Englisch)

569956

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

112112 113

Return to the Top page

Troubleshooting

Return to the Top page

Troubleshooting

Problems and Solutions

Ifanytroubleoccurs,firstcheckthefollowingtableforpossibleproblems.

• Somefunctionsofthisunitmaybedisabledbysomesettingsmadeonthisunit.

• Whatmightseemtobeamalfunctioninyourunitmayjustbetheresultofslightmisoperation

ormiswiring.

About settings

Problem Reason Solution

•Cannotsetupthesubwoofer.

•Cannotsetupsubwooferphase.

•Nooutputfromthesubwoofer.

•Cannotsetupthelowpassfilter.

•Cannotsetupthehighpassfilter.

Subwooferisnotset

toon.

Setthesubwoofertoon.

SeeSpeaker setup (P.95).

Thedualzonefunction

isenabled.

Setthedualzonefunctiontooff.

SeeZone Control (P.102).

•Cannotselecttheoutput

destinationofthesubsourcein

thedualzone.

•Cannotadjustthevolumeofthe

rearspeakers.

Thedualzonefunction

isdisabled.

Setthedualzonefunctiontoon.

SeeZone Control (P.102).

•Cannotsetuptheequalizer.

•Cannotsetupthecrossover

network.

Thedualzonefunction

isenabled.

Setthedualzonefunctiontooff.

SeeZone Control (P.102).

“DSPSelect”issetto

“Bypass”.

Set“DSPSelect”to“Through”.

SeeDSP select (P.98).

About audio operations

Problem Reason Solution

Radioreceptionispoor. Thecarantennaisnot

extended.

Pullouttheantennaalltheway.

Theantennacontrol

wireisnotconnected.

Connectthewirecorrectly.

See“Connection”intheQuickStartGuide.

Cannotplayaudiofilesstoredin

adisc.

“CDRead”issetto“2”.

Set“CDRead”to“1”.

SeeDisc setup (P.30).

Cannotselectafolder. Therandomplay

functionisenabled.

Turnofftherandomfunction.

Cannotperformrepeatplay

duringVCDplayback.

ThePBCfunctionis

enabled.

TurnoffthePBCfunction.

Thespecifieddiscdoesnotplay,

butanotheroneplaysinstead.

Thediscisquitedirty.

Cleanthedisc.

SeePrecautions on handling discs (P.4).

Thediscisseverely

scratched.

Tryanotherdiscinstead.

Thesoundskipswhenanaudio

fileisbeingplayed.

Thediscisscratched

ordirty.

Cleanthedisc.

SeePrecautions on handling discs

(P.4).

Therecording

conditionisbad.

Recordthefileagainoruseanotherdisc.

Troubleshooting

Other

Problem Reason Solution

TheTouchSensorTonedoesn’t

sound.

Thepreoutjackisbeing

used.

TheTouchSensorTonecannotbeoutput

fromthepreoutjack.

Error Messages

Whenyoufailtooperatetheunitcorrectly,thecauseofthefailureappearsasthemessageon

thescreen.

Error Message Cause Solution

Protect Protectivecircuithasbeenactivated

becauseaspeakercordhasshorted

orithascomeincontactwiththe

carchassis.

Wireorinsulatethespeakercordas

appropriateandthenpushthe<Reset>

button(P.115).

HotError Whentheinternaltemperatureof

thisunitrisesto60°Cormore,the

protectioncircuitisactivatedand

youmaynotbeabletooperate

theunit.

Usetheunitagainafterreducingthe

temperatureoftheunit.

MechaError Thediscplayerismalfunctioning. Ejectthediscandtryinsertingitagain.Contact

theKenwooddealerifthisindicatorcontinues

blinkingorthedisccannotbeejected.

DiscError Anunplayablediscisinserted.

Changethedisc.

SeePlayable Media and Files (P.116).

ReadError Thediscisquitedirty.

Cleanthedisc.

SeePrecautions on handling discs (P.4).

Discisupsidedown. Loadthediscwiththelabeledsideup.

RegionCode

Error

Thediscyouwantedtoplayhasa

regioncodethatcannotbeplayed

withthisunit.

SeeRegion Codes in the World (P.121)or

tryanotherdisc.

ParentalLevel

Error

Thediscyouwantedtoplayhasa

higherlevelthantheparentallevel

youset.

Settheparentallevel.

SeeParental level (P.29).

Error07–67 Theunitisnotoperatingcorrectly

duetosomereasonorother.

Pushtheunit’sResetbutton.Ifthe“Error

07−67”messagedoesnotdisappear,seeyour

nearestKenwooddealer.

NoDevice

(USBdevice,

Bluetooth

audioplayer)

TheUSBdeviceisselectedasa

sourcealthoughnoUSBdeviceis

connected.

Changethesourcetoanysourceotherthan

USB/iPod.ConnectaUSBdevice,andchange

thesourcetoUSBagain.

Disconnected

(iPod)

TheiPod/Bluetoothaudioplayer

isselectedasasourcealthough

noiPod/Bluetoothaudioplayeris

connected.

Changethesourcetoanysourceotherthan

iPod/Bluetooth.ConnectaniPod/Bluetooth

audioplayer,andchangethesourcetoiPod/

Bluetoothagain.

NoMediafile

(USBdevice)

TheconnectedUSBdevicecontains

noplayableaudiofile.Mediawas

playedthatdoesn’thavedata

recordedthattheunitcanplay.

SeePlayable Media and Files (P.116)and

tryanotherUSBdevice.

Kenwood DNX4330 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info