Bedienungsanleitung Kenwood DVF8100 (Seite 15 von 36) (Englisch)

30499

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

DVF-3080/DVF-8100 (EN/K,P,E,X,Y)

Set Up functions

Preparations

LOCK (Parental Control)

Rating

Some movies contain scenes that may not be suitable

for children to view. Many of these discs contain paren-

tal control information that applies to the complete disc

or to certain scenes on the disc. Movies and scenes are

rated from 1 to 8, depending on the country. Some discs

offer more suitable scenes as an alternative.

The parental control feature allows you to block access

to scenes below the rating you input, thereby prevent-

ing your children from being able to view material you

believe is unsuitable.

1 Select "Rating" on the LOCK menu then press

the Cursor right (3 ) key.

2 To access the Rating, Password and Country Code

features, you must input the 4-digit security code

you created. If you have not yet entered a secu-

rity code you are prompted to do so.

Input a digit code and press ENTER key. Enter

it again and press ENTER key to verify. If you

make a mistake before pressing ENTER key,

press CLEAR key.

3 Select a rating from 1 to 8 using the Cursor up/

down (5/∞) keys.

Rating 1-8: Rating one (1) has the most restrictions and

rating eight (8) is the least restrictive.

Unlock

If you select unlock, parental control is not active and the

disc plays in full.

If you set a rating for the player, all disc scenes with the

same rating or lower are played. Higher rated

scenes are not played unless an alternate scene is avail-

able on the disc. The alternative must have the same rat-

ing or a lower one. If no suitable alternative is found, play-

back stops. You must enter the 4-digit password or

change the rating level in order to play the disc.

4 Press ENTER key to confirm your rating selec-

tion, then press SETUP key to exit the menu.

Note

Password (Security Code)

You can enter or change password.

1 Select Password on the LOCK menu then press

the Cursor right (3) key.

2 Follow step 2 as shown left column (Rating).

"Change" or "New" is highlighted.

3 Enter the new 4-digit code, then press ENTER

key. Input it again to verify.

4 Press SETUP key to exit the menu.

If you forget Security Code

If you forget your security code you can clear using the

following steps:

1 Press SETUP key to display the Setup menu.

2 Input the 6-digit number "210499" and the se-

curity code is cleared.

3 Enter a new code as described above.

Country Code

Enter the code of the country/area whose standards

were used to rate the DVD video disc, based on the list

in the reference chapter.

Ratings are country-dependent.

1 Select "Country Code" on the LOCK menu,

then press the Cursor right (3).

2 Follow step 2 as shown left column (Rating).

3 Select the first character using the Cursor up/

down (5/∞) keys.

4 Shift the cursor using the Cursor right (3) key.

and select the second character using the Cur-

sor up/down (5/∞) keys.

5 Press ENTER to confirm your country code se-

lection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood DVF8100 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood DVF8100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info