Bedienungsanleitung Kenwood FDM786 Multipro Classic (Seite 9 von 121) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

630832

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

efore plugging in

●

Make sure your electricity supply is the same as the one

hown on the underside of your appliance.

ARNING: THIS APPLIANCE MUST BE EARTHED.

●

his appliance conforms to EC directive 2004/108/EC on

Electromagnetic Compatibility and EC regulation no.

935/2004 of 27/10/2004 on materials intended for contact

ith food.

before using for the first time

1 Remove the plastic blade covers from the knife blade. Take

are the blades are very sharp. These covers should

be discarded as they are to protect the blade during

manufacture and transit only.

Wash the parts see ‘care & cleaning’

key

processor

power unit

bowl with drive shaft

detachable drive shaft

lid

feed tube

pushers

safety interlocks

speed/pulse control

power on light

cord storage (at back)

weighing function (TYPE FDM79)

kg/lb button

on/zero button

display screen

weighing tray

thermoresist blender

filler cap

lid

goblet

sealing ring

blade unit

base

filler cap vents

A - standard attachments

knife blade

dough tool

dual whisk

max capacity disc

4mm slicing disc

2mm slicing disc

B - optional attachments

Not all the attachments listed below will be included with your

ood processor model. Attachments are dependent upon the

odel variant. For more information or to order additional

attachments refer to the “service and customer care” section.

xtra fine grater disc (if supplied)

fine Julienne disc (if supplied)

French fry disc (if supplied)

olding tool (if supplied)

mini bowl and blade (if supplied)

grinding mill (if supplied)

itrus juicer (if supplied)

metal juicer extractor (if supplied)

attachment storage box (if supplied)

to use your food processor

1 Fit the bowl to the power unit. Place the handle towards the

right hand side and turn forward

until it locks.

2 Fit an attachment over the bowl drive shaft.

Note: Detachable drive shaft

should be fitted

when using the discs, mini bowl, whisk, folding

tool and citrus juicer.

●

Always fit the bowl and attachment onto the processor

before adding ingredients.

3 Fit the lid ensuring the top of the drive shaft/tool locates into

the centre of the lid

●

The processor will not operate if the bowl or lid

are not fitted correctly into the interlock. Check

that the feed tube and bowl handle are situated

to the right hand side.

4 Plug in. The Power On light will come on. Select one of the

following options: -

Speed Control – manually select the required speed (refer to

the recommended speed chart).

Pulse – use the pulse (P) for short bursts. The pulse will

operate for as long as the control is held in position.

5 At the end of processing turn the speed control to the ‘OFF’

position (Align the speed control with the power on light

●

Always switch off and unplug before removing the

lid.

important

●

Your processor is not suitable for crushing or grinding coffee

beans, or converting granulated sugar to caster sugar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood FDM786 Multipro Classic Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info