Bedienungsanleitung Kenwood FP270 series (Seite 5 von 111) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463567

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

efore using your Kenwood appliance

●

Read these instructions carefully and retain for future reference.

●

Remove all packaging and any labels.

safety

●

he blades and discs are very sharp, handle with care. Always

old the knife blade by the finger grip at the top,

away from the cutting edge, both when handling and

leaning.

●

lways remove the knife blade before pouring contents from the

bowl.

●

eep hands and utensils out of the processor bowl and liquidiser

oblet whilst connected to the power supply.

●

Switch off and unplug:-

●●

efore fitting or removing parts;

●●

hen not in use;

●●

before cleaning.

●

Never use your fingers to push food down the feed tube. Always

use the pusher/s supplied.

●

Before removing the lid from the bowl or liquidiser/mill from the

power unit:-

●●

switch off;

●●

wait until the attachment/blades have completely stopped;

●●

be careful not to unscrew the liquidiser goblet or mill jar from

the blade assembly.

●

Liquids should be allowed to cool to room temperature before

blending.

●

Do not use the lid to operate the processor, always use the on/off

speed control.

●

This machine will be damaged and may cause injury

if the interlock mechanism is subjected to excessive

force.

●

Never use an unauthorised attachment.

●

Never leave the appliance unattended when it is operating.

●

Never use a damaged appliance. Get it checked or repaired: see

‘service & customer care’.

●

Never let the power unit, cord or plug get wet.

●

Don’t let excess cord hang over the edge of a table or worktop

or touch hot surfaces.

●

Do not exceed the maximum capacities stated in the

recommended speed chart.

●

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

●

Children should be supervised to ensure that they do not play

with the appliance.

●

Only use the appliance for its intended domestic use. Kenwood

will not accept any liability if the appliance is subject to improper

use, or failure to comply with these instructions.

●

Misuse of your processor/liquidiser can result in injury.

Refer to the relevant section under “using the attachments” for

additional safety warnings for each individual attachment.

before plugging in

●

Make sure your electricity supply is the same as the one shown

on the underside of your machine.

●

This appliance conforms to EC directive 2004/108/EC on

Electromagnetic Compatibility and EC regulation no. 1935/2004

of 27/10/2004 on materials intended for contact with food.

efore using for the first time

1 Remove all packaging including the plastic blade covers from the

knife blade. Take care the blades are very sharp. These

overs should be discarded as they are to protect the blade

during manufacture and transit only.

2 Wash the parts see ‘cleaning’

Push excess cord into the back of the machine.

key

processor

ቢ

pusher

ባ feed tube

ቤ

lid

ብ

bowl

ቦ

detachable drive shaft

ቧ speed + pulse control

ቨ power unit

ቩ safety interlock

ቪ cord storage

glass liquidiser

ቫ blade unit

ቭ sealing ring

ቮ goblet

ቯ lid

ተ filler cap

glass mill

ቱ blade unit

ቲ sealing ring

ታ jar

attachments

ቴ knife blade

ት dough tool

ቶ twin beater geared whisk

thick slicing/coarse shredding disc

thin slicing/fine shredding disc

rasping disc

geared citrus press

centrifugal juicer

spatula

to use your food processor

1 Fit the detachable shaft onto the power unit ᕡ.

2 Then fit the bowl. Place the handle towards the back and turn

clockwise until it locks ᕢ.

3 Fit an attachment over the drive shaft.

●

Always fit the bowl and attachment onto the machine before

adding ingredients.

4 Fit the lid ᕣ - ensuring the top of the drive shaft locates into the

centre of the lid.

●

Do not use the lid to operate the processor, always

use the on/off speed control.

5 Switch on and select a speed.

●

Your processor will not operate if the bowl or lid are

not fitted correctly into the interlock. Check that the

feed tube and bowl handle are situated to the right

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood FP270 series Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info