706662
9
Zoom out
Zoom in
Vorherige Seite
1/153
Nächste Seite
Mashers
i
mportant
Never use the masher in a
saucepan over direct heat. Always
r
emove the saucepan from the heat
and allow to cool slightly.
Do not tap the masher on the side
o
f the cooking vessel during or
after mashing. Use a spatula to
scrape excess food away.
For best results when mashing
never fill a saucepan etc., more
than half full with food.
AA
Plastic Masher (if
supplied)
to use the masher
The masher can be used to mash
cooked vegetables such as
potatoes, swede and carrot.
Don’t mash hard or uncooked
foods - you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
direction
6
until it locks in position.
3 Turn the masher upside down and
fit the paddle over the central hub
and turn anti clockwise to secure
7
. (If the collar is not fitted
then the paddle will not
secure in place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan
or bowl etc.
TYPE HDP30 - press the on
button.
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
Move the masher in an up and
down movement throughout the
mix until the desired result is
achieved.
7 After use release the on button and
unplug.
8
Press the blender shaft release
buttons to release the masher
assembly.
9 Remove the paddle from the
masher by turning clockwise.
1
0 Unscrew the collar from the masher
foot.
BB
M
etal Masherpro™ (if
supplied)
to use the masher
The masher comes with two
screens which can be used as
f
ollows:-
Coarse screen - to mash
cooked vegetables such as
potatoes, swede, yams and carrot.
Fine screen - to mash cooked or
soft fruits and vegetables.
Don’t mash hard or uncooked
foods you may damage the unit.
1 Cook hard vegetables and fruit and
drain first before mashing.
2 Fit the masher collar to the masher
shaft by turning in a clockwise
direction until it locks in position
8
.
3 Fit either the coarse or fine screen
to the masher shaft – turn
clockwise to lock
9
.
4 Turn the masher upside down and
fit the paddle over the central hub
and turn anti-clockwise to secure
bk
.
(If the collar is not fitted
then the paddle will not
secure in place).
5 Fit the power handle to the masher
assembly - push to lock.
6 Plug in.
7 Place the masher in the saucepan
or bowl etc.
TYPE HDP30 - press the on
button.
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
Move the masher in an up and
down movement throughout the
mix until the desired result is
achieved. Increase the speed if
required.
8 After use release the on button and
unplug.
9 Press the blender shaft release
buttons to release the masher
assembly.
10 Remove the paddle from the
masher by turning clockwise.
7
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood HDP401 Triblade wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info