Bedienungsanleitung Kenwood hm 335 (Seite 11 von 48) (Englisch)

159919

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

System connection

1 Headphone jack %

Connect headphone with a stereo mini-plug

(optionally available).

2 BEAT CANCEL switch ¶

3 0 CD lid ^

To load or eject a CD, press the area marked 0 push

open on the CD lid to open it.

4 Display panel

5 volume knob $

Turn this knob for volume adjustment.

6 4 and ¢ multi control keys

In the normal mode, these are used to

– skip CD tracks

– fast forward or rewind tape (

– select a preset radio station )

In the menu mode (selected by pressing the mode key),

press these buttons to select the desired menu item. To

set or enter setting of the menu item, press the set/sound

key.

• Pressing these (multi control keys) switches the dis-

play contents.

"TAPE RVS"

(

"AUTO PRESET ?" or "AUTO MEMORY ?" ¡

(Only when the TUNER input is selected)

"INPUT ?"

ﬂ

(Only when the AUX input is selected)

"TIMER ?"

"TIME ADJUST ?" ‡

"APS ?" 9

• The function of these keys returns to the normal mode

when they have not been operated for 20 seconds.

7 Tuning Mode key

CD, TAPE : &(

Press to stop a disc or tape operation.

TUNER :

™

Press to switch between the AUTO (auto tuning,

stereo reception) and MONO (manual tuning,

monaural reception) modes.

Standby mode:

Press to display the clock.

Each press switches the mode.

Clock display on

Clock display dimmed

Clock display off

7 Cassette holder *

To load or eject a cassette tape, press the area marked

0 push open on the cassette holder to open it.

8 Basic operation keys

AUX key ﬂ

Press to reproduce the external source component

connected to the AUX (analog auxiliary input) jacks.

TUNER /band key )

Press to select the TUNER input.

This key is also used to select the received broadcast

band.

CD 6 key ^

Press to select the CD input and start playback. During

CD playback, press to pause.

TAPE 2 3 key *

Press to select the TAPE (cassette deck) input and

start playback of a tape. Pressing this key during tape

playback switches the tape transport direction.

9 POWER key (For U.S.A. and Canada) $

key (For other countries) $

Press to set the unit to On or Standby.

standby/timer indicator

Lights up when the unit is set to the Standby mode of

power.

Red : Ordinary standby.

Green : Timer standby.

Off : The unit is On.

0 Remote sensor #

This window receives signals from the remote control

unit.

! rec key ¶

Press to start tape recording. Pressing this key during

recording initiates record-pause after leaving a no-

sound blank of about 4 seconds.

@ mode key 9

Press to switch the function of the 4 and ¢ keys to

menu select mode. Press again to reset the function of

the 4 and ¢ keys to normal mode.

# set/sound key 9

Press to select EX. BASS or LOUD sound effect or

press to set or enter an item selected with the 4 and

¢ keys.

Controls and indicators

mode

set/sound

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood hm 335 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info