Bedienungsanleitung Kenwood hm 337 (Seite 11 von 20) (Englisch)

159035

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

6 Press program button (PROGRAM button on

the remote control) again to store the radio

station.

Repeat steps 3 to 6 to store other preset radio

stations.

Note:

During program, if no button is press within 20 seconds,

the system will exit program mode automatically.

Tuning to a preset radio station

Press p.call + button (P. CALL + button on the

remote control) or p.call – button (P. CALL – button

on the remote control) to select the desired preset

number.

•The preset number and radio frequency will

appear on the display.

STEREO/MONO

Press the STEREO/MONO button on the remote

control to select stereo or mono mode.

• When stereo mode is selected, the icon

"STEREO" will appear on the display (if current

station is FM stereo).

Note:

You are able to select stereo or mono mode in FM band

only.

Using RDS (Radio Data System)

(For the Europe only)

RDS is a system that transmits useful information

(in the form of digital data) for FM broadcasts along

with the broadcast signal. Tuners and receivers

designed for RDS reception can extract the

information from the broadcast signal for use with

various functions, such as automatic display of the

station name.

RDS functions:

PTY (Program TYpe Identification) Search

Automatically tunes to a station that is currently

broadcasting the specified program type (genre).

PS (Program Service Name) Display:

Automatically displays the station name

transmitted by the RDS station.

Using the radio

Tuning in radio stations

1 Press TUNER/band button (TUNER/BAND

button on the remote control) to select TUNER

mode.

The current radio frequency will be displayed.

2 Press TUNER/band button (TUNER/BAND

button on the remote control) to select the

desired waveband: FM or AM.

3 Press and hold 4 or ¢ button (4 or ¢

SEARCH/TUNING button on the remote

control).

Repeat this procedure until the desired station

is reached.

To tune to a weak station briefly press 4 or

¢ button (4 or ¢ SEARCH/TUNING

button on the remote control) repeatedly until

the display shows the desired frequency or

when the best reception has been obtained.

Storing preset

You can store up to 20 for FM and 20 for AM radio

stations in the memory. When a preset radio

stations selected, the preset number appears on

the display.

1 Press TUNER/band button (TUNER/BAND

button on the remote control) to select TUNER

mode.

2 Press TUNER/band button (TUNER/BAND

button on the remote control) to select the

desired waveband: FM or AM.

3 Press 4 or ¢ button (4 or ¢ SEARCH/

TUNING button on the remote control) to tune

to the desired frequency.

4 Press program button (PROGRAM button on

the remote control) so that “– –” will start

flashing.

5 If you wish to store the radio station to another

preset number, p.call + button (P. C A LL +

button on the remote control) or p.call – button

(P. CALL – button on the remote control) to

select the desired preset number.

continued to next page

5467/08-20/EN 04.5.26, 3:06 PM11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood hm 337 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood hm 337

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info