Bedienungsanleitung Kenwood hm 383 md (Seite 33 von 84) (Englisch)

159527

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Recording on MD

Basic section

The MD recorder of this unit is compatible with stereo long play of MD (MDLP compatible equipment).

The available recording modes include the stereo, monaural LP, stereo LP2 and stereo LP4 modes.

It is possible to accommodate tracks recorded in different recording modes in a single MD.

Be sure to select the recording mode before starting recording of MD.

Stereo LP modes (LP2, LP4)

Types of recording modes

Stereo (STEREO) :

The available recording time is equal to the figure

indicated on each MD cartridge.

Stereo LP 2 (LP2) :

The recording time, available in stereo, becomes

about twice the figure indicated on each MD cartridge.

Stereo LP 4 (LP4) :

The recording time, available in stereo, becomes about

four times the figure indicated on each MD cartridge.

Monaural LP (MONO) :

The recording time, available only in monaural,

becomes about twice the figure indicated on

each MD cartridge.

Stamping (STAMP)

This unit has the stamping function, which attaches

stamp characters "LP:" at the beginning of each track

title to facilitate identification of tracks recorded in the

LP2 or LP4 mode. "LP:" can be displayed as a part of

each track title only when the stamping function is set

to on.

Note that "LP:" is displayed as a part of track title only

when a track is recorded in stereo LP2 or LP4 mode is

played on an MDLP-incompatible recorder/player.

This unit allows you to select the STAMP function on

("LP:" attached to the title) or off ("LP:" not attached to

the title).

If an MD recorded in the LP2 or LP4 mode is

played back on a recorder/player incompat-

ible with LP2/LP4

When a track recorded in stereo LP2 or LP4 mode is

played back on an MDLP-incompatible recorder/

player, the disc can be played but no audio will be

reproduced. When an MD containing tracks recorded

in stereo LP2 and LP4 modes and those recorded in

the STEREO and MONO modes is played back, audio

will be reproduced only with the tracks recorded in

STEREO and MONO modes.

When playing such an MD, be careful not to increase

the volume setting during playback with no audio re-

production. Otherwise, a very high volume will be re-

produced when playback of a track recorded in the

STEREO or MONO mode starts.

The stereo LP modes enables long hours of record-

ing by adopting higher digital audio compression

rates than the stereo and monaural recording

modes. The LP4 mode features even longer record-

ing time by adopting even higher compression rate

than the LP2 mode.

Tracks recorded in different recording modes are subjected to certain restrictions in MD editing. See "Combin-

ing two tracks (COMBINE)".

÷ The tracks recorded in the stereo LP2 or stereo LP4 mode

on the MD recorder of the unit can be played back only on

MDLP-compatible recorder/player.

÷ In stereo recording of MD, the recorded audio qual-

ity may be degraded as the recording time per disc is

increased. If you want to record audio by putting pri-

ority on the quality, it is recommended to use the

STEREO mode.

Stereo long play recording/playback of MD

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood hm 383 md Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info