159527
48
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
48
Convenient recording methods
Application section
Desired CD tracks can be programmed in the desired sequence and recorded onto an MD or tape.
To record a CD only onto tape, go to step 3.
Make preparation for recording.
Make sure to put the MD recorder or cassette deck to stop mode.
1 Select the CD input.
2 Ensure that the "RANDOM" indicators are not lit.
3 MD : Insert a recordable MD in the MD recorder.
TAPE : Perform steps 1 to 3 of the procedure in "Recording on TAPE".
4 Insert the desired CD in the CD player.
5 Ensure that the "HIGH-SPEED" indicator is not lit. w
1
÷ If the "RANDOM" indicator is lit, turn it off by pressing the RANDOM key to cancel the random play mode.
÷ If the "HIGH-SPEED" indicator is lit, turn it off by setting the recording speed to the normal speed.
Program recording
(CD
=
MD / CD
=
TAPE / TWIN REC)
Select the recording mode.
1 Press the menu key.
2 Turn the volume/multi control knob to se-
lect "MD REC MODE", then press the set/
demo key.
3 Turn the volume/multi control knob to se-
lect the recording mode, then press the
set/demo key.
4 To use the LP stamping function, turn
the volume/multi control knob to set
"LP: STAMP on", then press the set/
demo key.
(If you selected "STEREO" or "MONO", go to
step 3.)
2
Turning the knob switches the display contents.
1 "STEREO" : Stereo recording mode
2 "LP2" : Stereo LP2 recording mode
3 "LP4" : Stereo LP4 recording mode
4 "MONO" : Monaural recording mode
Turning the knob switches the display contents.
1 "LP: STAMP on" :
Characters "LP:" are input
at the beginning of each track title.
2 "LP: STAMP off" : Characters "LP:" are not in-
put at the beginning of each track title.
menu
set
/
demo
volume / multi control
\
\
Discs or tracks recorded in the LP2 or LP4 mode will
produce no sound if they are played back on a player
which is incompatible with the LP2 or LP4 mode. When
a disc is expected to be MDLP-incompatible players,
record it in the STEREO or MONO mode.
Even when the "HIGH-SPEED" indicator is lit, the MD recording is performed as normal-speed
recording.
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood hm 383 md wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info