Bedienungsanleitung Kenwood hm 537 mp (Seite 13 von 20) (Englisch)

159043

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

6 Press program button (PROGRAM button on

the remote control) again to store the radio

station.

Repeat steps 3 to 6 to store other preset ra-

dio stations.

Note:

During program, if no button is press within 20 sec-

onds, the system will exit program mode automatically.

Tuning to a preset radio station

Press p.call/album up button (P. CALL + button

on the remote control) or p.call/album down

button (P. CALL – button on the remote control) or

digit buttons (0~9) on the remote control to se-

lect the desired preset number.

•The preset number and radio frequency will

appear on the display.

STEREO/MONO

Press the STEREO/MONO button on the remote

control to select mono or stereo mode.

• When stereo mode is selected, the icon

“STEREO” will appear on the display (if cur-

rent station is FM stereo).

Note:

You are able to select stereo or mono mode in FM band

only.

Using RDS (Radio Data System)

(For the Europe only)

RDS is a system that transmits useful informa-

tion (in the form of digital data) for FM broadcasts

along with the broadcast signal. Tuners and receiv-

ers designed for RDS reception can extract the

information from the broadcast signal for use with

various functions, such as automatic display of the

station name.

RDS functions:

PTY (Program TYpe Identification) Search

Automatically tunes to a station that is currently

broadcasting the specified program type (genre).

PS (Program Service Name) Display:

Automatically displays the station name transmit-

ted by the RDS station.

Using the radio

Radio Text function:

Displays the radio text data transmitted by some

RDS stations when you press the RDS/DISPLAY

button. There is “NO TEXT” display if no text data

is transmitted.

•The icon “R·D·S” appears on the display when

an RDS broadcast (signal) is received.

Note:

Some functions and function names may differ certain

countries and areas.

Using the RDS/DISPLAY button

(For the Europe only)

While receiving a RDS station, pressing the RDS/

DISPLAY button on the remote control changes

the contents of the display.

• PS (Program Service name) display:

The station name such as BBC is displayed

automatically when an RDS station is received.

If no PS data was sent, “NO PS” is displayed.

•RT (Radio Text) display:

Text data accompanying the RDS broadcast

scrolls across the display. “NO TEXT” or “RT -

---” is displayed if the current RDS station does

not provide any RT data.

•Frequency display:

Displays the frequency of the current station.

Tuning by Program TYpe (PTY

search)

(For the Europe only)

This function lets you set the tuner to automati-

cally search for stations which are currently broad-

casting the type of program (genre) you want to

listen to.

1 Press TUNER band button (TUNER/BAND

button on the remote control) to TUNER mode.

2 Press TUNER band button (TUNER/BAND

button on the remote control) to select FM.

3 Press PTY button on the remote control.

If the current station is with RDS, the program

type of the station is displayed.

continued to next page

*5469/08-20/EN 04.6.1, 11:20 AM13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood hm 537 mp Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood hm 537 mp

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info