Bedienungsanleitung Kenwood HM-790 (Seite 5 von 41) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

70652

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

before using your Kenwood appliance

●

Read these instructions carefully and retain for future

reference.

●

Remove all packaging and any labels.

safety

●

Ensure the cord is fully unwound from the cord wrap

before using the handmixer.

●

Never put the handmixer body in water or let the cord

or plug get wet.

●

Keep fingers, hair, clothing and utensils away from

moving parts.

●

Never let the cord touch hot surfaces or hang down

where a child could grab it.

●

Never use a damaged handmixer. Get it checked or

repaired: see 'service and customer care'.

●

Never use an unauthorised attachment.

●

Always unplug the appliance when not in use, before

fitting or removing parts or before cleaning.

●

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

●

Children should be supervised to ensure that they do

not play with the appliance.

●

Only use the appliance for its intended domestic use.

Kenwood will not accept any liability if the appliance is

subject to improper use, or failure to comply with these

instructions.

before plugging in

●

Make sure your electricity supply is the same as the

one shown on the underside of your handmixer.

●

This handmixer complies with European Economic

Community Directive 89/336/EEC.

before using your handmixer for the first time

●

Wash the parts (see 'cleaning').

key

ቢ speed switch

ባ tool release button

ቤ beaters

ብ cord wrap

ቦ kneader with additional collar

ቧ kneader without additional collar

ቨ beater storage pillars

ቩ kneader storage pillars

ቪ worktop storage unit

ቫ cord clip

to use your handmixer

1 Unwrap the cord from the cord wrap and make sure

the speed switch is in the off position by lining up the O

symbol on the handmixer body with the dot on the side

of the speed switch. Insert the beaters or kneaders –

turn and push until a positive click is felt. The tabs on

the tool shafts need to line up with the outlet holes.

Important: The kneader with the additional collar will

only fit into the larger outlet hole.

2 Plug in.

3With the ingredients in a suitably sized bowl, place the

beaters/kneaders into the bowl.

4 Pull the speed switch backwards to reach the desired

speed (the first dot on the handmixer body is slow and

speed 5 is fast). Line up the dot on the side of the

speed switch with the corresponding speed.

●

As the mixture thickens, increase the speed.

●

If the machine labours increase the speed.

●

Move the speed switch forwards to the pulse position

(P) to operate the motor as required. The motor will

operate for as long as the pulse is held in position.

5 When the mixture has reached the desired

consistency, return the speed switch to the off

position and then lift the beaters/kneaders out of the

bowl.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood HM-790 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info