7
troubleshooting guide
problems suggestions
After the appliance is plugged in • Check that the plug is inserted correctly
and the power button is pressed, and that the power is switched on.
no indicators are lit • Where fitted check the plug fuse.
The power button indicator lights • Check that pan is present
up, but heating does not start • Check suitability of the pan
when power control is adjusted • Check that pan is centrally located
Heating stops suddenly • Check power supply to the appliance
during operation • Check the air entry or the air vent is
not blocked
• Check the timing period has not ended
• Check the appliance has not overheated
or entered error mode – unplug, allow to
cool and try again later
In timer mode, the timer is set and • Increase the power with the power
the on/off button is flashing but control
heating does not begin.
Failure codes occur: • Appliance may have overheated/boiled
E:03 E:06 dry. Unplug the appliance, allow to cool
and try again later
E:07 E:08 • Fluctuation in mains supply. Unplug the
appliance, allow to cool and try again
later
E:01 E:02 E:04 E:05 E:0b E:0C • Send it to a service facility for repair
