Bedienungsanleitung Kenwood JKP230 series (Seite 3 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

510872

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

4 Your kettle will boil and switch off

automatically. To re-boil, wait a few

seconds - the on/off switch needs

time to reset.

●

If you experience problems

with your kettle switching on

and off during use or

switching off before boiling,

check that the flat element is

free from scale - see

“descaling”.

●

Your kettle is fitted with a filter to

hold back limescale particles.

●

If you find drops of water under your

kettle, don’t worry - it is just

condensation.

boil-dry protection

●

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

care and cleaning

●

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

●

Wipe with a damp cloth, then dry.

Do not use abrasives - they will

scratch the plastic surfaces.

the inside

●

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

the filter

1 Open the lid. Press the lid release

button ባ.

2 Gently lift out the filter ᕡ.

3 either rinse under the tap or use a

soft brush.

or when descaling your kettle, drop

the filter in too. Rinse thoroughly.

4 To re-fit the filter, slide it in until

secure ᕢ.

5 Close and lock the lid by pressing

the lid down ᕣ.

descaling

●

Regular descaling of the flat element

will improve the performance of your

kettle. If the kettle is not descaled

regularly the build up of limescale

may result in the following:

●

problems may be experienced

with the kettle switching on and

off during use or switching off

before boiling.

●

the kettle may take longer to boil.

●

the flat element may be damaged.

Please note: Failure to descale your

kettle may invalidate your guarantee.

●

When limescale starts to build up on

the heating element, buy a suitable

descaler and descale your kettle.

After descaling, boil with fresh water

several times and discard. Clean any

descaler off the kettle - it can

damage the parts.

●

Some regions of the country have

chalky water. This makes boiled

water look cloudy and leaves a

deposit on the side of the kettle. This

is normal but can be removed with

regular cleaning.

●

Alternatively, to reduce limescale

build up, use filtered water to fill your

kettle.

service and customer

care

●

If the cord is damaged it must, for

safety reasons, be replaced by

KENWOOD or an authorised

KENWOOD repairer.

If you need help with:

●

using your appliance

●

servicing or repairs

Contact the shop where you bought

your appliance.

●

Designed and engineered by

Kenwood in the UK.

●

Made in China.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood JKP230 series Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info