You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to 6 frequencies can be stored this way.
Display and setting:
Select the display "A-MEMORY" during the selecting function in
the menu system.
Hold down either the 4 or ¢ button for two seconds or
more to start auto memory function.
The numbers of the preset station buttons showed in order.
2
1
Auto Memory Entry <In Tuner mode>
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "AUTO 1" indicator lights up
when auto seek tuning is selected, and the "AUTO 2" indicator
lights when preset station seek tuning is selected.
Display and setting:
"AUTO 1" : Auto seek tuning mode (Default setting)
"AUTO 2" : Preset station seek tuning mode
"MANUAL" : Manual tuning mode
Selecting Tuning Mode <In Tuner mode>
With the local seek function turned on, auto seek tuning skips
stations with relatively poor reception.
Display and setting:
"LO.S ON" : The local seek function is on.
"LO.S OFF" : The local seek function is off. (Default setting)
Local Seek Function
<In FM reception of Tuner mode>
You can arrange to have news bulletins interrupt your current
listening source, including other radio stations. When the
News Bulletin function is on, the PTY News Timeout setting
allows you to set the interval during which further news
interruption cannot take place. You can adjust the PTY news
interruption period from 10 to 90 minutes for each journey.
Display and setting:
"NEWS OFF" (Default setting) , "NEWS 00M" - "NEWS 90M"
(M= minutes)
: When you select the news interruption timeout interval, the
News function turns on and the NEWS indicator lights up.
When a news bulletin is received, "NEWS" will be displayed
and reception will begin at the preset volume.
• If you choose the "20M" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is
received.
• This function is only available if the desired station sends PTY-
code for news bulletin or belongs to <Enhanced Other
Network>-Network sending PTY-code for news bulletin.
• If you turn on the news bulletin function in the MW/LW band,
the band is switched automatically to the FM band.
However, the MW/LW band is not returned to when you turn
off the function.
NOTE
News Bulletin Function with PTY News Timeout
Setting
Function of the KDC-4590R/KDC-4590RV/KDC-4090R
You can switch the colour of the button illumination between
green and red.
Display and setting:
"COL GRN" : The colour of the illumination is green.
"COL RED" : The colour of the illumination is red.
Selectable Illumination
Menu settings
— 24 —
English
