511174
61
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
English
|
61
12-7. Initial settings
You can configure initial settings of this unit.
Press [SRC] to select a Standby (“STANDBY”).
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Initial Settings” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select an Initial setting item using [Control]
knob.
Display Description
“SRC Select” Set source selection method.
1: The source switches each time [SRC] is
pressed.
“2”: Press [SRC], Turn [Control] knob to select
the source, and then press [Control] knob to
determine it.
“Key Beep Setting the operation check sound (beep
sound) ON/OFF.
ON / “OFF”
“Russian” When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist
name/ Album name
“ON” / “OFF
“Function Language Changes the display language of items
displayed in the Function setting mode.
English / “Français” / “Español” /
“Deutsch” / “Italiano” / “Pyccкий”
“Power OFF Wait” Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
OFF”: Power OFF Timer function is OFF.
20MIN”: Turns the power OFF after 20
minutes.
40MIN”: Turns the power OFF after 40
minutes.
60MIN”: Turns the power OFF after 60
minutes.
aha Source[2] Sets whether to display aha during source
selection.
ON / “OFF”
“Built-in AUX” Sets whether to display AUX during source
selection.
ON / “OFF”
“CD Read” Sets the method for reading CD.
When unable to play a special format CD, set
this setting to “2” to force playing. Note that
some music CDs may be unplayable even
when set to “2”.
In addition, audio files cannot be played when
set to “2”. Normally, keep this set to “1”.
1: Automatically distinguishes between the
audio file disc and music CD when playing
a disc.
2: Forces playing as a music CD.
“Built-in AMP” Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
ON / “OFF”
“Speaker Select”[1] Sets the speaker type so that the System Q
value is optimal.
OFF: OFF
“5/4inch”: For 5 & 4 in. speaker
“6x9/6inch”: For 6 & 6x9 in. speaker
“O.E.M.: For the OEM speaker
“F/W Update Upgrades the firmware.
Selecting “YES” and then pressing [Control]
knob starts upgrading the firmware.
For how to update the firmware, access our
web site.
http://www.kenwood.com/cs/ce/
(Colored text: Factory setting)
[1] Function of KDC-5057SD.
[2] Function of KDC-BT73DAB/ KDC-BT53U.
Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6]. 
61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood KDC-5057SD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood KDC-5057SD

Kenwood KDC-5057SD Kurzanleitung - Deutsch - 152 seiten

Kenwood KDC-5057SD Bedienungsanleitung - Deutsch - 20 seiten

Kenwood KDC-5057SD Kurzanleitung - Englisch, Holländisch - 152 seiten

Kenwood KDC-5057SD Bedienungsanleitung - Holländisch - 82 seiten

Kenwood KDC-5057SD Kurzanleitung - Holländisch - 20 seiten

Kenwood KDC-5057SD Kurzanleitung - Französisch, Italienisch, Portugiesisch, Spanisch - 152 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info