Bedienungsanleitung Kenwood KDC-6021 (Seite 6 von 40) (Englisch)

523216

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

— 6 —

English

Notes on playing MP3

This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note,

however, that the MP3 recording media and formats acceptable

are limited. When writing MP3, pay attention to the following

restrictions.

Acceptable media

The MP3 recording media acceptable to this unit are CD-ROM, CD-R,

and CD-RW.

When using CD-RW, do full format not quick format to prevent

malfunction.

Acceptable medium formats

The following formats are available for the media used in this unit. The

maximum number of characters used for file name including the

delimiter (".") and three-character extension are indicated in

parentheses.

• ISO 9660 Level 1 (12 characters)

• ISO 9660 Level 2 (31 characters)

• Joliet (64 characters)

• Romeo (128 characters)

Up to 200 characters can be displayed in the long file name format.

For a list of available characters, see the instruction manual of the

writing software and the section Entering file and folder names below.

The media reproducible on this unit has the following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 255

• Maximum number of characters for folder name: 64

• Maximum number of folders: 50

MP3 written in the formats other than the above may not be

successfully played and their file names or folder names are not

properly displayed.

Settings for your MP3 encoder and CD writer

When you use your CD writer to record MP3 up to the maximum disc

capacity, disable additional writing. For recording on an empty disc up

to the maximum capacity at once, check Disc at Once.

Entering ID3 tag

The Displayable ID3 tag is ID3 version

1.x.

For the character code, refer to the

List of Codes.

Entering file and folder names

The code list characters are the only

file names and folder names that can

be entered and displayed.

If you use any other character for

entry, the file and folder names are not

displayed correctly. They may neither be displayed correctly depending

on the CD writer used.

The unit recognizes and plays only those MP3 which have the MP3

extension (.MP3).

A file with a name entered with characters not on the code list may not

play correctly.

Writing files into a medium

When a medium containing MP3 data is loaded, the unit checks all the

data on the medium. If the medium contains a lot of folders or non-

MP3 files, therefore, it takes a long time until the unit starts playing

MP3.

In addition, it may take time for the unit to move to the next MP3 file

or a Track Search or Album Search may not be performed smoothly.

Loading such a medium may produce loud noise to damage the speakers.

• Do no attempt to play a medium containing a non-MP3

file with

the MP3 extension.

The unit mistakes non-MP3

files for MP3 data as long as they

have the MP3 extension.

• Do not attempt to play a medium containing non MP3.

KDC-MV6521(E)_U.S r4.5 02.10.8 2:26 PM Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-6021 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-6021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info