By sliding the Manual Open Switch during forced closing, you
can open the control panel. Follow the directions below to
preset the number of times that this switch needs to be slid in
order to open the panel.
To preset the number of times to slide the Manual Open Switch:
Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Manual Open Switch
Setting function appears in the display. Press the 4 button to
search in the other direction.
The function setting is indicated by "Open SW # / OPEN SW #"
in the display, indicating that the Manual Open Switch Setting
mode is on.
Switching settings
Press either the AM or FM button.
3
2
1
Manual Open Switch Setting
Press the ¡ (EJECT) button to make the faceplate slide open,
and then adjust the faceplate angle using the angle adjustment
switch.
Adjustment may be made from 0 to 2.
• Firmly slide the switch until it clicks.
• Do not apply excessive force to the faceplate under settings 1
or 2.
NOTE
You can adjust the faceplate angle for easy viewing.
Adjusting faceplate angle:
Faceplate Angle Adjustment
Function of the KDC-PS9070R
The following operation allows separate sound sources to
control the output of the front and rear speakers. The Dual zone
system can only be switched on or off when the source is set to
the AUX mode.
Turning the Dual zone system On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Dual zone system
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Zone 2 ON" or "Zone 2
OFF" in the display, indicating that the Dual zone system
function is on or off, respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
• You must purchase the optional KCA-S210A/CA-C1AX/KDC-
CPS82/KDC-CX82 device before you can use this function.
• You can choose to send the AUX input through the rear channel,
and the unit’s tuner or CD source through the front channel.
• The Bass, Treble and Loudness adjustments do not affect the
rear channel.
• When the Dual zone system is turned on, the External disc
control features cannot be used.
• When you set the Dual zone system to on whilst the non-fading
preout is switched on, the sound of the non-fading preout does
not be outputted.
NOTE
4
3
2
1
Dual Zone System
Other features
— 34 —
English
