Bedienungsanleitung Kenwood KDC-7537UY (Seite 4 von 32) (Englisch)

523461

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY

Basic Operation

AUX

[1] [6][5][4][3][2] [FNC] [TI]

[ATT] [SRC]

[AUD]

Auxiliary input

(Rear side)

General functions

Power/Source Select button [SRC]

Turns on the power.

When the power is ON, select a source.

SRC Select mode 1: Press the [SRC] button and then

turn the Control knob or push it toward left or right.

To determine the selected source, press the Control

knob.

SRC Select mode 2: Pressing this button each time

switches between sources.

Tuner (“TUNER”) , USB or iPod (“USB” or “iPod”), CD

(“Compact Disc”) , Auxiliary input (“AUX”), and Standby

(“STANDBY”)

Press at least 1 second to turn off the power.

⁄

• When the power is ON, the <Security Code> (page

16) is displayed as “CODE ON” or “CODE OFF”.

• The SRC Select mode can be set in “MENU” > “SRC

Select” of <Function Control> (page 6).

• When an optional accessory is connected, the

source name for each device appears.

• This unit automatically turns full power OFF after 20

minutes lapses in Standby mode in order to save the

vehicle's battery. The time until full power OFF can

be set in “Power OFF” of <Function Control> (page

6).

• When connection of the iPod is recognized, the

source display changes from “USB” to “iPod”.

• USB (iPod) source is recognized as CD source on the

connected unit.

Volume control [AUD]

Turn the knob to adjust the volume.

Attenuator

[ATT]

Turning the volume down quickly.

When the volume is reduced, the “ATT” indicator

flashes.

Muting volume upon reception of phone call

When there is a call, “CALL” is displayed and the

audio system is paused. When the call ends, “CALL”

disappears and the audio system comes back on.

The audio system comes back on when [SRC] is

pressed during a call.

⁄

• To use the TEL Mute feature, you need to hook

up the MUTE wire to your telephone using

a commercial telephone accessory. Refer to

<Connecting Wires to Terminals> (page 27).

Auxiliary input Auxiliary input

Connect a portable audio device with mini-plug

cable (3.5 ø).

⁄

• Use the mini-plug cable which is stereo type and

does not have any resistance.

•

The auxiliary input requires the setting made in “MENU”

> “Built in AUX” of <Function Control> (page 6).

Subwoofer output Control knob

Switches between ON (“SUB WOOFER ON”) and OFF

(“SUB WOOFER OFF”) each time pushing toward down

for at least 2 seconds.

⁄

• This function requires the setting made in “MENU” >

“SWPRE” of <Function Control> (page 6).

Function Control [FNC]

Pressing this button allows you to set various

functions using the Control knob. Refer to <Function

Control> (Page 6).

Category Function of setup item

MENU Allows you to set up the environment.

DISP Allows you to set up the display.

Text/Title scroll

Control knob

Scrolls the CD, audio file, and Radio text display when

pushing toward up for at least 2 seconds.

Control knob

USB Terminal

Release

B64-4049-00_00_E_English.indd 4B64-4049-00_00_E_English.indd 4 08.2.5 4:24:59 PM08.2.5 4:24:59 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-7537UY Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-7537UY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info