Bedienungsanleitung Kenwood KDC-8024 (Seite 60 von 64) (Englisch)

41277

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English

— 60 —— 60 —

Troubleshooting Guide

If the following situations, consult your nearest service

center:

Even though the disc changer is connected, the Disc Changer source is not

ON, with "AUX1" showing in the display during the Changer Mode.

The messages shown below display your systems

condition.

Eject: No disc magazine has been loaded in the changer. The disc

magazine is not completely loaded.E01

➪ Load the disc magazine properly.

No CD in the unit.

➪ Insert the CD.

No Disc: No disc has been loaded in the disc magazine.E02

➪ Load a disc into the disc magazine.

TOC Error: No disc has been loaded in the disc magazine.E04

➪ Load a disc into the disc magazine.

The CD is quite dirty. The CD is upside-down. The CD is

scratched a lot.

➪ Clean the CD and load it correctly.

E-05: The CD is upside-down.E05

➪ Load the CD correctly.

Blank Disc: Nothing has been recorded on the MD.E10

No Track Disc: No tracks are recorded on the MD, although it has a title.E11

E-15: Media was played that doesn’t have data recorded that the

unit can play. E15

➪ Use media that has data recorded that the unit can play.

No Panel: The faceplate of the slave unit being connected to this unit

has been removed.E30

➪ Replace it.

E-77: The unit is malfunctioning for some reason.E77

➪ Press the reset button on the unit. If the "E-77" code does

not disappear, consult your nearest service center.

? Can’t remove disc.64

✔ The cause is that more than 10 minutes has elapsed since the vehicle

ACC switch was turned OFF.

☞ The disc can only be removed within 10 minutes of the ACC

switch being turned OFF. If more than 10 minutes has elapsed,

turn the ACC switch ON again and press the Eject button.

? The disc won’t insert.65

✔ There’s already another disc inserted.

☞ Press the [0] button and remove the disc.

? Direct Search can’t be done.66-1

✔ Another function is ON.

☞ Turn Random Play or other functions OFF.

? Track Search can't be done.66-2

✔ For the discs/folders first or last song.

☞ For each disc/folder, Track Search can't be done in the backward

direction for the first song or in the forward direction for the last

song.

MP3/WMA source

? Cannot play an MP3/WMA.67

✔ The media is scratched or dirty.69

☞ Clean the media, referring to the CD cleaning of the section on

<About CDs> (page 9).

? The sound skips when an MP3/WMA is being played.73-1

✔ The media is scratched or dirty.

☞ Clean the media, referring to the CD cleaning of the section on

<About CDs> (page 9).

✔ The recording condition is bad.73-2

☞ Record the media again or use another media.

The MP3/WMA track time isn’t displayed correctly.80

✔ ---

☞ There are times when it isn’t displayed correctly according to the

MP3/WMA recording conditions.

KDC-PSW9524_U.S_r5.pg 02.12.13 2:06 PM Page 60

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-8024 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-8024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info