Bedienungsanleitung Kenwood KDC-BT450DAB (Seite 29 von 144) (Deutsch, Englisch, Französisch)

796175

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH 21

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Bluetooth® (for / / )

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2 /

1 .

• To select the desired first letter, turn the volume knob or press

, then press the knob.

Select “1” to search with numbers and select “ ” to search with symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• For using phonebook with this unit, make sure to allow access to or transfer

from your smartphone. Depending on the connected phone, the process

may be different.

• Contacts are categorized as: HM (home), OF (office), MO (mobile),

OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú” are

shown as “U”.)

[NUMBER DIAL]

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press

to move the entry position.

Repeat step 1 and step 2 until you finish entering the phone number.

Press the volume knob to call.

[VOICE] Speak the name of the contact you want to call or the voice command to

control the phone functions. (See also the following “Make a call using voice

recognition”.)

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

Make a call using voice recognition

1 Press and hold to activate the voice recognition of the connected

phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.

2 Turn the volume knob to select

[CALL HISTORY]

[PHONE BOOK]

[NUMBERDIAL]

, then press the knob.

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored.

To erase a contact from the preset memory, select

[NUMBER DIAL]

in step 2,

store a blank number in step 3 and proceed to step 4.

Make a call to a registered number

1 Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

“NO MEMORY” appears if there is no contact stored.

JS_KWD_KDC_BT950DAB_EN_EN00.indd 21JS_KWD_KDC_BT950DAB_EN_EN00.indd 21 5/5/2020 5:08:06 PM5/5/2020 5:08:06 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT450DAB Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-BT450DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info