Bedienungsanleitung Kenwood KDC-BT47SD (Seite 9 von 21) (Englisch)

511175

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

16 English English 17

CONTENTS

PAR

iPod

VOICE

Press and hold to pairing mode.

Getting Started of Bluetooth

Easy Pairing function

1 Press and hold to enter easy pairing

mode

“PAIRING” is displayed.



Any of the following is displayed

depending on Bluetooth device

registration condition:

– “SEARCHING”: When registering a

Bluetooth device for the first time.

– “(device name)”: When a Bluetooth

device has already been registered.

– “DEVICE FULL”: When a maximum of five

Bluetooth devices have already been

registered.



To cancel the easy pairing mode, press .

When registering a Bluetooth device for the

first time (Registering a Bluetooth device)

2 “SEARCHING” is displayed.

Search for the Bluetooth device.

When search is completed, “FINISHED” is

displayed.

3 Turn the volume knob to select a

Bluetooth device name, press to confirm.

4 “CONFIRM DVC” is displayed.

If “PAIRING OK” is displayed, proceed to

step 7.

If “PIN CODE” is displayed, proceed to steps

If “*** NG” is displayed, press the volume

knob. Proceed to steps 4.

5 Input the PIN code



To select the number, turn the volume

knob.



To move to the next digit, press ¢.



To delete the last digit, press 4.

6 Press the volume knob to transmit the

PIN code.

If “PAIRING OK” is displayed, registration is

completed.

When “CONFIRM DVC” is displayed, confirm

connection with a Bluetooth device

operation.

7 The receiver is connected to a Bluetooth

device, with “HF CONNECT” or “AUD

CONNECT” displayed, and exits the easy

pairing mode.



If an error code is displayed during paring,

see <Troubleshooting> (page 37).



If the error message appears even though

the PIN code is correct, try the procedure

mentioned in <Registering a Special

Bluetooth device> (page 22).

When a Bluetooth device has already been

registered, or maximum of five Bluetooth

devices have already been registered

(Selecting a Bluetooth device)

2 “(device name)” or “DEVICE FULL” is

displayed.

3 Turn the volume knob to select a

Bluetooth device name.



To register a new Bluetooth device,

select “[NEW DEVICE]”, then go to “When

registering a Bluetooth device for the first

time.”

4 Press the volume knob.

5 Turn the volume knob to select the

profile for the device to connect.



“HANDSFREE”/ ”AUDIO”: The device can

be connected using either a hands-free

or audio profile.

“HF/AUD”: The device is can be connected

using both hands-free and audio profiles.

6 Press the volume knob to set up the

Bluetooth device.



“HA (device name)”: The selected

Bluetooth device is busy.



“-H-A (device name)”: The selected

Bluetooth device is on standby.



“ H A (device name)”: The Bluetooth

device is deselected.

• “H”(HFP)or“A”(A2DP)indicatesthe

correspondingprofile.

7 Press to exit easy pairing mode.

Deleting the registered Bluetooth device

2 “(device name)” or “DEVICE FULL” is

displayed.

3 Turn the volume knob to select a

Bluetooth device name.

4 Press and hold the volume knob to delete

the selected Bluetooth device.

“DELETE” is displayed.

5 Turn the volume knob to select “YES”,

then press to confirm.

“COMPLETED” is displayed.

6 Press to exit easy pairing mode.

Registering from Bluetooth devices

(Pairing)

1 Press SRC to turn on the power.

2 Start registering this unit by operating

the Bluetooth device.

By operating the Bluetooth device, register

the hands-free unit or audio unit (pairing).

Select “KENWOOD BT CD/R-6P1” from the

list of found units.

3 Input the PIN code (“0000”) in the

Bluetooth device.

Check that registration is complete on

the Bluetooth device. PIN code is set to

“0000” as the default. You can change this

code. Refer to [PIN CODE EDIT] under

<Bluetooth Setup> (page 24).

4 By operating the Bluetooth device, start

hands-free connection.



If there are 5 or more Bluetooth devices

registered, you cannot register a new

Bluetooth device.

About the Cell-Phone



Version: Bluetooth Standard Ver. 3.0

Certified



Profile:

HFP (Hands Free Profile)

HSP (Headset Profile)

SPP (Serial Port Profile)

OPP (Object Push Profile)

PBAP (Phone book Access Profile)

A2DP (Advanced Audio Distribution Profile)

AVRCP (Audio/Video Remote Control

Profile)

For the cell-phones verified for compatibility,

access the following URL:

www.kenwood.com/cs/ce/bt/



The units supporting the Bluetooth

function have been certified for conformity

with the Bluetooth Standard following the

procedure prescribed by Bluetooth SIG.

However, it may be impossible for such

units to communicate with your cell-

phone depending on its type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT47SD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-BT47SD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info