Bedienungsanleitung Kenwood KDC-BT6144 (Seite 16 von 48) (Englisch, Holländisch)

121771

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U

Operation of hands-free phoning

Before Use

• For details on the Bluetooth cell-phone with the

hands-free function, see <About the Cell-Phone>

(page 35).

• You need to register your cell-phone before using

it with this unit. For more details, see <Registering

Bluetooth device> (page 28).

• If you have registered two or more cell-phones,

you need to select one of them. For more details,

see <Selecting the Bluetooth device You Wish to

Connect> (page 29).

• To use the Phone Book, it must be downloaded to

this unit in advance. For details, see <Downloading

the Phone Book> (page 29).

• “BT” indicator is lit when a cell-phone is connected

to this unit.

Receiving a call

Answering a Phone Call

Press the [AUD] button.

⁄

• The following operations disconnect the line:

- Insert a CD.

- Connect a USB device.

• The name of the calling party is displayed if it has already

been registered in the Phone Book.

Rejecting an Incoming Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

During a call

Disconnecting a Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Switching to the Private Mode

Press the [38] button.

Switches between Private talk (“PRIVATE TALK”)

and Hands-free talk (“HANDS FREE”) each time this

button is pressed.

⁄

• Depending on the type of your cell-phone, switching

to the private talk mode may select the source that was

used before commencing the hands-free connection.

If this happens, the source cannot be switched back to

Call waiting

Answering Another Incoming Call with the

Current Call Suspended

1 Press the [AUD] knob.

2 Turn the [AUD] knob or push it towards up or

down. Select the “ANSWER” display.

3 Press the [AUD] knob.

Answering another Incoming Call after

Terminating the Current Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Continuing the Current Call

1 Press the [AUD] knob.

2 Turn the [AUD] knob or push it towards up or

down. Select the “REJECT” display.

3 Press the [AUD] knob.

Answering the Waiting Call after Terminating

the Current Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Switching between the Current Call and Waiting

Call

Press the [AUD] knob.

Each pressing of this knob switches the calling

party.

Other functions

Clearing the Disconnection Message

Press the [ ] button.

“HF DISCONCT” disappears.

Switching between Display Modes

Press the [38] button for at least 1 second.

Pressing this button each time switches between

name and telephone number.

Function of KDC-BT6544U/BT6544UY/BT6044/BT6144UY

the hands-free talk mode by operating this unit. Operate

your cell-phone to return to the hands-free talk mode.

Adjusting the Voice Volume during a Call

Turn the [AUD] knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-BT6144 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-BT6144

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info