Bedienungsanleitung Kenwood KDC-MP338 (Seite 13 von 68) (Englisch, Französisch, Spanisch)

667463

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English

5 Repeat steps 3 and 4, and complete the

Security Code.

6 Confirm the Security Code

Press the Control knob for at least 3 second.

When “RE-ENTER” is displayed, “CODE” is also

displayed.

7 Do the step 3 through 6 operation, and reenter

the Security Code.

“APPROVED” is displayed.

The Security Code function activates.

⁄

• If you enter the wrong Code in steps 3 through 5, repeat

from step 3.

• When the Security Code function is activated, “SECURITY

SET” changes to “SECURITY CLR”.

• To deactivate the Security Code function, see the next

section <Deactivating Security Code>.

8 Exit Security Code mode

Press the [M.JOG] button.

Entering Security Code

The Security Code is required to use the audio unit

when the unit is first used after removed from the

battery power source or the Reset button is pressed.

1 Turn the power ON.

2 Do the step 3 through 6 operation, and enter

the Security Code.

“APPROVED” is displayed.

Deactivating Security Code

Deactivating the Security Code function.

1 Select Security Code item during Menu mode

Select the “SECURITY CLR” display.

For how to select menu items, refer to <Menu

System>(page 12).

2 Enter Security Code mode

Press the Control knob for at least 1 second.

When “ENTER” is displayed, “CODE” is also displayed.

3 Select the digits to enter

Push the Control knob towards right or left.

4 Select the Security Code numbers

Push the Control knob towards up or down.

5 Repeat steps 3 and 4, and complete the

Security Code.

6 Press the Control knob for at least 3 second.

“CLEAR” is displayed.

The Security Code function deactivates.

7 Exit Security Code mode

Press the [M.JOG] button.

⁄

• If the entered security code is incorrect, “ERROR” is

displayed. Enter a correct security code.

Manual Clock Adjustment

1 Select Clock Adjustment item during Menu

mode

Select the “CLOCK ADJUST” display.

For how to select menu items, refer to <Menu

System>(page 12).

2 Enter Clock Adjust mode

Press the Control knob for at least 1 second.

The clock display blinks.

3 Adjust the time

Push the control knob towards up or down to

adjust the hours and right or left to adjust the

minutes.

4 Exit Clock adjustment mode

Press the [M.JOG] button.

Function of KDC-X492

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

1 Select AMP Control item during Menu mode

Select the “AMS CONTROL” display.

For how to select menu items, refer to <Menu

System>(page 12).

2 Enter AMP Control mode

Press the Control knob for at least 1 second.

3 Select the AMP Control item for adjustment

Push the Control knob towards up or down.

⁄

• For the details on the AMP Control item, see the

Instruction manual attached to the LX AMP.

4 Adjust the AMP Control item

Push the Control knob towards right or left.

5 Exit AMP Control mode

Press the [M.JOG] button.

B64-3955-00_English_K_r1.indd 13B64-3955-00_English_K_r1.indd 13 07.11.12 5:19:59 PM07.11.12 5:19:59 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-MP338 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info