Bedienungsanleitung Kenwood KDC-PSW9527 (Seite 8 von 67) (Englisch)

41269

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

English

Notes on playing MP3/WMA

Note, however, that the MP3/WMA recording

media and formats acceptable are limited. When

writing MP3/WMA, pay attention to the following

restrictions.

Acceptable media

The MP3/WMA recording media acceptable to this

unit are CD-ROM, CD-R, and CD-RW.

When using CD-RW, do full format not quick format

to prevent malfunction.

Acceptable medium formats

The following formats are available for the media

used in this unit. The maximum number of

characters used for file and folder name including

the delimiter (".") and three-character extension are

indicated in parentheses.

• ISO 9660 Level 1 (12 characters)

• ISO 9660 Level 2 (31 characters)

• Joliet (64 character)

(KDC-W8027; Up to 32 characters are displayed)

• Romeo (128 character)

(KDC-W8027; Up to 64 characters are displayed)

• Long file neme (200 characters)

(KDC-W8027; Up to 64 characters are displayed)

• Maximum number of characters for folder name:

(KDC-W8027; Joliet: Up to 32 characters are

displayed)

For a list of available characters, see the instruction

manual of the writing software and the section

Entering file and folder names below.

The media reproducible on this unit has the

following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 255

• Maximum number of folders:

KDC-PSW9527/W9027; 100

KDC-W8027; 50

• Maximum number of files and folders

(KDC-W8027): 512

MP3/WMA written in the formats other than the

above may not be successfully played and their file

names or folder names are not properly displayed.

Settings for your MP3/WMA encoder and

CD writer

Do the following setting when compressing

audio data in MP3/WMA data with the MP3/WMA

encoder.

• Transfer bit rate: MP3: 8 —320 kbps

WMA: 48 —192 kbps

• Sampling frequency

MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz

WMA: 32, 44.1, 48 kHz

When you use your CD writer to record MP3/WMA

up to the maximum disc capacity, disable additional

writing. For recording on an empty disc up to the

maximum capacity at once, check Disc at Once.

• Play mode may not be possible when portions of the

functions of Windows Media Player 9 or higher are used.

Entering ID3 tag

The Displayable ID3 tag is ID3 version 1.x.

For the character code, refer to the List of Codes.

Entering file and folder names

The code list characters are the only file names and

folder names that can be entered and displayed.

If you use any other character for entry, the file and

folder names are not displayed correctly. They may

neither be displayed correctly depending on the CD

writer used.

The unit recognizes and plays only those MP3/WMA

which have the MP3/WMA extension (.MP3/.WMA).

• A file with a name entered with characters not on the

code list may not play correctly.

Writing files into a medium

When a medium containing MP3/WMA data is

loaded, the unit checks all the data on the medium.

If the medium contains a lot of folders or non-MP3/

WMA files, therefore, it takes a long time until the

unit starts playing MP3/WMA.

In addition, it may take time for the unit to move

to the next MP3/WMA file or a File Search or Folder

Search may not be performed smoothly.

KDC-PSW9527(E)_U.S _r5 8 03.11.28, 10:58:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-PSW9527 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-PSW9527

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info