Bedienungsanleitung Kenwood KDC-PSW9527 (Seite 24 von 67) (Englisch)

41269

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

English

General features

Function of the KDC-W8027

Speaker Setting

Fine-tuning so that the System Q value is optimal

when setting the speaker type.

1 Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

2 Enter Speaker Setting mode

Press the [Q] button.

"SP SELECT" is displayed.

3 Select the Speaker type

Press the [2] — [5] button.

Each time the button is pressed the setting

switches as shown below.

Speaker type Button Display

OFF [2] "OFF"

For 5 & 4 in. speaker [3] "5/4"

For 6x9 & 6 in. speaker [4] "6*9/6"

For the OEM speaker [5] "OEM"

4 Exit Speaker Setting mode

Press the [Q] button.

In External disc, or Auxiliary input source

Dual Zone System

Makes the sound different for the front channel

and rear channel.

Output the Internal source sound from either one

of the front or rear channels, and the sound of

other source from the Dual zone channel.

1 Select the source

Press the [SRC] button.

Select the source sound to be output from the

Dual zone channel.

2 Select the key function section

Press the [NEXT] button.

Repeatedly press the button until "2-ZN" is

displayed above the [5] /[2] button.

Refer to 'Notes on Multi-function Key System'

(page 10).

3 Enter the Dual Zone System Control mode

Press the [5] ("2-ZN")(KDC-W8027)/ [2] ("2-

ZN")(KDC-PSW9527/W9027) button.

4 Select the item for adjustment

Press the desired [2] — [3] button.

Each time the button is pressed the items that

can be adjusted switch as shown below.

Adjustment Item Button Display Range

Dual Zone System [2] "ON/OFF" ON/OFF

Dual Zone System

Front & Rear

[3] "F j R" Front/Rear

Dual Zone System Rear:

The front is this unit’s internal source, and the rear is

selected source sound.

Dual Zone System Front:

The rear is this unit’s internal source, and the front is

selected source sound.

5 Exit the Dual Zone System Control mode

Press the [6] ("RTN") button.

6 Select the source

Press the [SRC] button.

Select the source sound to be output from the

internal source channel.

• The Dual Zone System can be used with the sources

shown below.

- Internal auxiliary input

- KCA-S210A

- CA-C1AX

- External disc changer/ player

• While Dual Zone System is ON, the setting of Dual

Zone System Front or Rear is disabled.

Set Dual Zone System Front or Rear first, and then set

the Dual Zone System to ON.

• When the Dual Zone System is ON, there is no Dual

zone channel audio control or other effect.

• When you use the Dual Zone System by selecting the

optional accessory source for the output of the Dual

zone channel, you cannot select another optional

accessory source as the source for the Internal source

channel.

• When "SRS WOW" is selected at 'System Q' (KDC-

W8027) (page 20) the Dual Zone System cannot be

turned on and off.

Also set all the 'Audio Control' (KDC-W8027) (page 22)

WOW items to OFF.

The Dual Zone System cannot be turned on and off if

even one of the items is set to ON.

• The Dual Zone System cannot be used if a GSM hands

free unit or a DAB control unit is connected.

KDC-PSW9527(E)_U.S _r5 24 03.11.28, 10:59:09 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-PSW9527 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-PSW9527

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info