Bedienungsanleitung Kenwood KDC-PSW9527 (Seite 31 von 67) (Englisch)

41269

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

English

2nd section

Multi-function key operation

Audio setup item

[2]

"MEMORY"

[2] "USER"

[3] "INST"

User Memory

User Insttaller

[3]

"CALL"

[2] "USER"

[3] "INST"

Call User

Call Insttaller

• You can store an adjusted audio setup value by

selecting

"MEMORY". Also, you can recall it by

selecting "CALL". Refer to 'Audio Setup memory Recall'

(page 32).

3 Adjust the Audio setup item

Press the [4] or [¢] button.

Each time the button is pressed the setting

switches as shown below.

Adjustment Item Range

High Pass Filter Front

High Pass Filter Rear

High Pass Filter Center*

Through/30 — 250 (Hz)

Low Pass Filter Subwoofer 30 — 250 (Hz)

Subwoofer Phase setting Normal/ Reverse

DTA Front/DTA Rear/

DTA Subwoofer

0 — 610 (cm)

DTA Center*

0 — 170 (cm)

Bass Center Frequency 60 — 400 (Hz)

Middle Center Frequency 500 (Hz) — 3.15 (KHz)

Treble Center Frequency 4.00 (kHz) — 16.00 (KHz)

Bass Level/ Middle Level/

Treble Level

-9 — +9 dB

Bass Q Factor/ Middle Q Factor/

Treble Q Factor

0.25/ 0.50/ 1.00/ 2.00

SP-LEV Front Left/SP-LEV Front Right

SP-LEV Rear Left/SP-LEV Rear Right

SP-LEV Center*

/SP-LEV Subwoofer

-10 — +10

• The Adjustment item can also be controlled by the

rotary volume knob. Refer to 'Rotary Volume knob

operation mode select' (page 13).

• To get the best sound, first set the "CABIN" and "SP-

SEL" parameters using the 'Audio Setup (Easy mode)'

(page 28). Refer to 'Notes on Sound Management

System' (page 11).

• *

Function of the KDC-PSW9527

• When the 'Dual Zone System' (page 24) is ON, each of

the following setup is ignored.

- "X'over"/ "EQ" / "DTA"

4 Exit Audio setup mode

Press the [6] ("RTN") button.

Audio Setup Memory (PRO mode)

Selects the PRO mode of Audio setup

See the 'Audio Setup' (page 50) and select "Audio

Setup: PRO".

2 Select the source for adjustment

Press the [SRC] button.

3 Select the key function section

Press the [NEXT] button.

Repeatedly press the button until "AD SET" is

displayed above the [3] button.

Refer to 'Notes on Multi-function Key System'

(page 10).

4 Enter Audio Setup mode

Press the [3] ("AD SET") button.

5 Select the Adjustment item section

Press the [NEXT] button.

Repeatedly press the button until the desired

Adjustment item is displayed above the [2] — [5]

button.

6 Select the Audio Setup item for adjustment

Press the [2] — [5] button.

Adjust the audio setup by referring to the 'Audio

Setup (PRO mode)' (page 30).

7 Select the Memory item section

Press the [NEXT] button.

Repeatedly press the button until "MEMORY" is

displayed above the [2] button.

8 Select the Memory item

Press the [2] ("MEMORY") button.

9 Stores the adjusted audio setup value in

memory

Press the [2] ("USER")/ [3] ("INST") button for

at least 2 seconds.

The "MEMORY" display blinks 1 time.

"USER": The values are erased from memory if the

battery is removed or if the reset button

is pressed.

"INST": The values are held in memory even if the

battery is removed or if the reset button

is pressed.

10 Exit Audio Setup mode

Press the [6] ("RTN") button.

KDC-PSW9527(E)_U.S _r5 31 03.11.28, 10:59:33 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-PSW9527 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-PSW9527

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info