Bedienungsanleitung Kenwood KDC-PSW9531 (Seite 5 von 64) (Englisch)

565546

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed.

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

Reset button

• The characters which can be displayed by ISO

8859-1.

• There are places in this manual where lit

indicators are described; however, the only time

an indicator will light is in the following settings.

When Indicator is selected as mentioned in <Text

Display Switching> (page 22)

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on

the display on the actual equipment, and some

of the illustrations on the display may represent

something impossible in actual operation.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe neutral detergent off.

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty,

wipe them with a dry, soft cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 49).

About ODD (Offset Dual Differential) D/A

System

You can enjoy high quality sound play when

playing music CDs with the ODD D/A System

enabled. ODD D/A System has two built-in D/A

converters and each D/A converter processes D/A

conversion seperately on the front left and right

channel. Since digital processing is performed for

each channel seperately, noise occurance from

interference between channels is completely

suppressed and the seperation of audio sound

output from two channels is distinguished and

clear. Also, the ODD/A System produces the data

by which the sound data is offset on the minus side

and converts the two signals (original and offset

data) to the analog signal, which has less noise and

distortion, by the synthetic process.

However, ODD D/A System will be disabled if the

following settings are selected.

- When "2ZONE" of <Audio Setup> (page 11) is

"ON".

- When <Bypass Control> (page 16) is "Bypass".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-PSW9531 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-PSW9531

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info