Bedienungsanleitung Kenwood KDC-W313A (Seite 11 von 20) (Englisch)

68541

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

Function of KDC-W3544W

Activating Security Code

When Security Code is set, possibility of theft

is reduced because input of Security Code is

prompted to turn on the unit once it is turned off.

⁄

• You can set the Security Code with a 4 digit number of your

choice.

• The Security Code cannot be displayed or referenced. Make

a note of the Security Code and treasure it up.

1 Enter Standby

Press the [SRC] button.

Select the “STANDBY” display.

2 Enter Menu mode

Press the Search button for at least 1 second.

When “MENU” is displayed, “CODE SET” is also

displayed.

3 Enter Security Code mode

Press the [AUD] knob for at least 1 second.

When “ENTER” is displayed, “CODE” is also displayed.

4 Select the digits to enter

Press the [4] or [¢] button.

5 Select the Security Code numbers

Press the [FM+] or [AM–] button.

6 Repeat steps 4 and 5, and complete the

Security Code.

7 Confirm the Security Code

Press the [AUD] knob for at least 3 seconds.

When “RE-ENTER” is displayed, “CODE” is also

displayed.

8 Do the step 4 through 7 operation, and reenter

the Security Code.

“APPROVED” is displayed.

The Security Code function activates.

⁄

• If you enter the wrong Code in steps 4 through 6, repeat

from step 4.

9 Exit Security Code mode

Press the Search button.

Resetting the Security Code function when the

audio unit is first used after removed from the

battery power source or the Reset button is

pressed

1 Turn the power ON.

2 Do the step 4 through 7 operation, and enter

the Security Code.

“APPROVED” is displayed.

Now, you can use the unit.

⁄

• When the Security Code function is activated, “CODE

SET” changes to “CODE CLR”.

• To deactivate the Security Code function, see the next

section <Deactivating Security Code>.

Function of KDC-W3544W

Deactivating Security Code

To deactivate the Security Code function.

1 Enter Standby

Press the [SRC] button.

Select the “STANDBY” display.

2 Enter Menu mode

Press the Search button for at least 1 second.

“MENU” is displayed.

3 Select Security Code mode

Press the [FM+] or [AM–] button.

Select the “CODE CLR” display.

4 Enter Security Code mode

Press the [AUD] knob for at least 1 second.

When “ENTER” is displayed, “CODE CLR” is also

displayed.

5 Select the digits to enter

Press the [4] or [¢] button.

6 Select the Security Code numbers

Press the [FM+] or [AM–] button.

7 Repeat steps 4 and 5, and complete the

Security Code.

8 Press the [AUD] knob for at least 3 seconds.

“CLEAR” is displayed.

The Security Code function deactivates.

9 Exit Security Code mode

Press the Search button.

⁄

• If a wrong security code is entered, “ERROR” is displayed.

Enter a correct security code.

B64-4214-00_00_En.indd 11B64-4214-00_00_En.indd 11 08.7.25 10:26:24 AM08.7.25 10:26:24 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W313A Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W313A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info