Bedienungsanleitung Kenwood KDC-W7037 (Seite 4 von 48) (Englisch)

62437

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check with

your Kenwood dealer to make sure that they work

with your model and in your area.

• Characters that conform to ISO 8859-1 can be

displayed.

• Characters that conform to ISO 8859-5 or ISO 8859-

1 can be displayed. Refer to <Selecting Russian

Characters> (page 33). (Russian sales area of KDC-

W7537UY/W7037Y)

• The RDS feature won’t work where the service is not

supported by any broadcasting station.

• There are places in this manual where lit indicators

are described; however, the only time an indicator

will light is in the following settings.

When Status Display is set to On as mentioned in

<Status Setting> (page 11).

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

How to reset your unit

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when the

Reset button is pressed.

• Remove the USB device before pressing the Reset

button. Pressing the Reset button with the USB

device installed can damage the data contained in

the USB device. For how to remove the USB device,

refer to <Playing USB (iPod) device> (page 21).

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth or

using a volatile liquid such as thinner or alcohol may scratch

the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe

them with a clean soft dry cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 35).

About KENWOOD "Music Editor" of PC

application attached to KDC-W7537U/

W7537UY

• "Music Editor" is recorded in the CD-ROM attached

to this unit.

• Refer to the attached installation manual for the

installation method of "Music Editor".

• Refer to the user’s manual recorded in the

installation CD-ROM and Help of "Music Editor" for

the operation method of "Music Editor".

• The unit can play CD/ USB device created by "Music

Editor".

• Information about "Music Editor" upgrade is put on

the site, www.kenwood.com.

B64-3629-00_00.Indd 4B64-3629-00_00.Indd 4 07.1.6 6:25:17 PM07.1.6 6:25:17 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W7037 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W7037

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info