Bedienungsanleitung Kenwood KDC-W7144 (Seite 4 von 56) (Englisch)

465207

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

AUX

[AUD]

[FNC]

[SRC]

[ ]

[TI]

[



]

KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY

General functions

Power/Source Select button: [SRC]

Turns on the power.

When the power is ON, select a source.

SRC Select mode 1: Press the [SRC] button and then

turn the Control knob or push it toward up or down.

To determine the selected source, press the Control

knob.

SRC Select mode 2: Pressing this button each time

switches between sources.

Tuner (“TUNER”) , USB or iPod (“USB” or “iPod”),

CD (“CD”) , Auxiliary input (“AUX”), and Standby

(“STANDBY”)

Press at least 1 second to turn off the power.

⁄

• The SRC Select mode can be set in “MENU” > “SRC Select” of

<Function Control> (page 6).

• Auxiliary input source is initially set to “OFF”. Set “Built in

AUX” described in <Function Control> (page 6) to “ON”.

: Select “MENU”

> “Built in AUX”

• When an optional accessory is connected, the source name

for each device appears.

• This unit automatically turns full power OFF after 20

minutes lapses in Standby mode in order to save the

vehicle’s battery. The time until full power OFF can be set in

“Power OFF” of <Function Control> (page 6).

• When connection of the iPod is recognized, the source

display changes from “USB” to “iPod”.

• USB (iPod) source is recognized as CD source on the

connected unit.

Volume control: [AUD] knob

Turn the knob to adjust the volume.

Subwoofer output: Control knob

Switches between ON (“SUBWOOFER ON”) and OFF

(“SUBWOOFER OFF”) each time pushing toward down

for at least 2 seconds.

• You can do this function when “SWPRE” in <Function

Control> (page 6) is set to “SW”.

Auxiliary input

Connect a portable audio device with mini-plug

cable (3.5 ø).

⁄

• Use the mini-plug cable which is stereo type and does not

have any resistance.

• The auxiliary input requires the setting made in “MENU”

“AUX” of <Function Control> (page 6).

Text/Title scroll: Control knob

Scrolls the CD and audio file text display when

pushing toward up for at least 2 seconds.

Muting volume upon reception of phone call

When there is a call, “CALL” is displayed and the audio

system is paused.

When the call ends, “CALL” disappears and the audio

system comes back on.

The audio system comes back on when [SRC] is

pressed during a call.

⁄

• To use the TEL Mute feature, you need to hook up the MUTE

wire to your telephone using a commercial telephone

accessory. Refer to <Connecting Wires to Terminals> (page

48).

Function Control : [FNC]

Pressing this button allows you to set various

functions using the Control knob. Refer to <Function

Control> (page 6).

Category Function of setup item

MENU Allows you to set up the environment.

SETUP Allows you to set up the display and color.

SOUND Allows you to set up the sound environment.

BT Allows you to set up the Bluetooth function.

— Allows you to set up the

Favorite Control : Control knob

You can recall the various registered functions by

turning the Control knob.

Basic Operation

Release

Auxiliary

input

Microphone

USB Terminal

Control

knob

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W7144 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W7144

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info