Bedienungsanleitung Kenwood KDC-W7144 (Seite 19 von 56) (Englisch)

465207

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

Operation of hands-free phoning

Function of KDC-BT8044U/ KDC-BT8044UY

KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY with KCA-BT200 (Optional Accessory)

Before Use

• For details on the Bluetooth cell-phone with the

hands-free function, see <About the Cell-Phone>

(page 43).

• You need to register your cell-phone before using

it with this unit. For more details, see <Registering

Bluetooth device> (page 35).

• If you have registered two or more cell-phones,

you need to select one of them. For more details,

see <Selecting the Bluetooth device You Wish to

Connect> (page 36).

• To use the Phone Book, it must be downloaded to

this unit in advance. For details, see <Downloading

the Phone Book> (page 36).

• “BT” indicator is lit when a cell-phone is connected

to this unit.

Receiving a call

Answering a Phone Call

Press the [AUD] button.

⁄

• The following operations disconnect the line:

- Insert a CD.

- Connect a USB device.

• The name of the calling party is displayed if it has already

been registered in the Phone Book.

Rejecting an Incoming Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

During a call

Disconnecting a Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Switching to the Private Mode

Press the Control knob.

Switches between Private talk (“PRIVATE”) and

Hands-free talk each time this button is pressed.

⁄

• Depending on the type of your cell-phone, switching

to the private talk mode may select the source that was

used before commencing the hands-free connection.

If this happens, the source cannot be switched back to

the hands-free talk mode by operating this unit. Operate

your cell-phone to return to the hands-free talk mode.

Adjusting the Voice Volume during a Call

Turn the [AUD] knob.

Call waiting

Answering Another Incoming Call with the

Current Call Suspended

1 Press the [AUD] button.

2 Turn the Control knob or push it towards up

or down. Select the “ANSWER” display.

3 Press the [AUD] button.

Answering another Incoming Call after

Terminating the Current Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Continuing the Current Call

1 Press the [AUD] button.

2 Turn the Control knob or push it towards up

or down. Select the “REJECT” display.

3 Press the [AUD] button.

Answering the Waiting Call after Terminating

the Current Call

Press the [SRC] button or press the [ ] button

for at least 1 second.

Switching between the Current Call and Waiting

Call

Press the [AUD] button.

Each pressing of this knob switches the calling

party.

Other functions

Clearing the Disconnection Message

KDC-BT8044U/ KDC-BT8044UY:

Press the [ ] button.

KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/

KDC-W7144UY:

Press the [ ] button for at least 1 second.

“HF Disconnect” disappears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W7144 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W7144

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info