Bedienungsanleitung Kenwood KDC-W7537U (Seite 44 von 48) (Englisch)

62512

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Troubleshooting Guide

The messages shown below display your

systems condition.

Eject: • No disc magazine has been loaded in

the changer. The disc magazine is not

completely loaded.

• No CD in the unit.

No Disc: No disc has been loaded in the disc

magazine.

TOC Error: • No disc has been loaded in the disc

magazine.

• The CD is quite dirty. The CD is upside-

down. The CD is scratched a lot.

Read Error: • The number of files or folders which are

stored in the connected USB device is above

the limitation.

• The file system of the connected USB device

is broken.

➪ Copy the files and folders for the USB

device again referring to http://www.

kenwood.com/usb/. If the error message is

still displayed, initialize the USB device or

use other USB devices.

Error 05: The disc is unreadable.

Blank Disc: Nothing has been recorded on the MD.

No Track: No tracks are recorded on the MD, although it

has a title.

Error 15: Media was played that doesn’t have data

recorded that the unit can play.

No Panel: The faceplate of the slave unit being

connected to this unit has been removed.

Error 77: The unit is malfunctioning for some reason.

➪ Press the reset button on the unit. If the

"Error 77" code does not disappear, consult

your nearest service center.

Mecha Error: Something is wrong with the disc magazine.

Or the unit is malfunctioning for some reason.

➪ Check the disc magazine. And then press

the reset button on the unit. If the "Mecha

Error" code does not disappear, consult

your nearest service center.

Hold Error: The protective circuit in the unit activates

when the temperature inside the automatic

disc changer exceeds 60°C (140°F), stopping

all operation.

➪ Cool down the unit by opening the

windows or turning on the air conditioner.

As the temperature falls below 60°C

(140°F), the disc will start playing again.

No Name: Attempted to display DNPS during the CD

play having no disc names preset.

Load: Discs are being exchanged in the Disc

changer.

Waiting: Radio text data is being received.

Reading: The unit is reading the data on the disc.

IN (Blink): The CD player section is not operating

properly.

➪ Reinsert the CD. If the CD cannot be

ejected or the display continues to flash

even when the CD has been properly

reinserted, please switch off the power

and consult your nearest service center.

Protect (Blink): The speaker wire has a short-circuit or

touches the chassis of the vehicle, and then

the protection function is activated.

➪ Wire or insulate the speaker cable properly

and press the reset button. If the "Protect"

code does not disappear, consult your

nearest service center.

Unsupported File:

An Audio file is played with a format that this

unit can’t support.

➪ ----

Copy Protection:

A copy-protected file is played.

➪ ----

DEMO MODE (Blink):

The Demonstration mode has been selected.

➪ The <Demonstration mode Setting> (page

35) is ON. Turn it OFF.

English

B64-3629-00_00.Indd 44B64-3629-00_00.Indd 44 07.1.6 6:25:33 PM07.1.6 6:25:33 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KDC-W7537U Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KDC-W7537U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info